Fill out our form with your model of interest and we'll send you a downloadable brochure or technical specifications document.
The industry standard continues to roll forward with the Cat® 14 Motor Grader. With a larger engine, improved fuel economy and machine balance, enhanced transmission performance and a range of technology, this machine is ready to excel at your grading projects.
Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detecte…
Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standar…
Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance. Prop…
Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue. &…
Optional rear vision camera enhances sight to rear of machine. Electrical disconnect and engine shutoff switches are ground…
Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.…
Specification | Value |
Base Power (1st Gear) - Net | 178 kW |
Engine Model | Cat C13 |
Bore | 130 mm |
Stroke | 157 mm |
Speed at Rated Power | 1,850 rpm |
Note (3) | Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Standard Capability | 50 °C |
Note (2) | Optimized VHP Plus is standard for the 14M3. |
Torque Rise | 41% |
Maximum Altitude - Full Power | 4.237 m |
Maximum Torque - VHP Plus | 1.542 N·m |
Emissions | Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
Maximum Altitude - Full Power (Tier 3) | 4.374 m |
Maximum Altitude - Full Power (Tier 2) | 3.672 m |
Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Standard - Fan Speed - Minimum | 550 rpm |
Note (4) | Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) |
Displacement | 12.5 l |
Number of Cylinders | 6 |
Note (5) | Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
Standard - Fan Speed - Maximum | 1,600 rpm |
Specification | Value |
Operating Weight - Typically Equipped | 25.968 kg |
Gross Vehicle Weight - Base* - Total | 23.124 kg |
Gross Vehicle Weight - Base* - Front Axle | 6.344 kg |
Gross Vehicle Weight - Typically Equipped - Total | 25.968 kg |
Gross Vehicle Weight - Typically Equipped - Rear Axle | 19.053 kg |
Gross Vehicle Weight - Typically Equipped - Front Axle | 6.915 kg |
Gross Vehicle Weight - Base* - Rear Axle | 16.780 kg |
Note | *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
Specification | Value |
Blade Width | 4.3 m |
Arc Radius | 413 mm |
Throat Clearance | 117 mm |
Blade Width - With End Bits | 4.290 mm |
Blade Height - With Cutting Edge | 631 mm |
Blade Width - Without End Bits | 4.166 mm |
Blade Height - Without Cutting Edge | 585 mm |
Specification | Value |
Circle - Outer Diameter | 1.822 mm |
Front Axle - Wheel Lean - Left/Right | 17.1° |
Front Axle - Total Oscillation per Side | 32° |
Specification | Value |
Transmission and Differential | 89 l |
Diesel Exhaust Fluid Tank (Tier 4 Only) | 22 l |
Hydraulic System | 125 l |
Circle Drive | 7 l |
Cooling System | 60 l |
Fuel Tank | 416 l |
Specification | Value |
Maximum Depth of Cut | 593 mm |
Circle Centershift - Left | 650 mm |
Maximum Lift Above Ground | 419 mm |
Circle Centershift - Right | 520 mm |
Blade Tip Range - Backward | 5° |
Maximum Shoulder Reach Outside of Tires - Right | 2.004 mm |
Moldboard Sideshift - Right | 790 mm |
Moldboard Sideshift - Left | 740 mm |
Maximum Shoulder Reach Outside of Tires - Left | 1.870 mm |
Blade Tip Range - Forward | 40° |
Specification | Value |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
Learn more information about the 14 Motor Grader.
Download (2.22 MB, PDF)From pre-purchase consults to end-of-lifecycle benefits, Mantrac informs, advises and partners with you.
Speak with the Sales Team to learn the latest prices and information on products that can deliver value and help transform your business.
Find the perfect machine or equipment solution by contacting one of our local specialists. They are on standby, ready to help you solve your operational challenges.
Mantrac Amerya - Alexandria
Km.28 Alex-Cairo Desert Road, Amreya, Al Amaria First, Alexandria Governorate, Egypt.
Ask an Expert today!