Fill out our form with your model of interest and we'll send you a downloadable brochure or technical specifications document.
The Cat® 992 Large Wheel Loader has set the standard in its size class for more than 50 years, delivering industry-leading productivity, unparalleled reliability and long life. Today’s 992 raises the bar. Compared to the 992K, the new 992 is up to 48% more efficient and 32% more productive, thanks to higher payload for improved pass match, increases in rimpull and breakout force, and an optimized linkage design. Extended component replacement intervals plus increased filter and turbo life help reduce maintenance costs. These improvements — and many more — combine to provide significant savings over the life of the machine for the lowest owning and operating costs in the industry. With both standard and high-lift configurations, the 992 offers the ideal pass match for fleets of Cat 775, 777 and 785 trucks.
Designed for visibility, with a taller windshield that provides a 25% increase in glass surface area for a better view to the buck…
50% increase in leg room and increased width by the operator’s knees compared to previous model. Reduced vibration, low soun…
Low-effort integrated controls that make cycles smoother and faster while reducing fatigue. Large, easy-to-read, color LED d…
Increased rated payload, which allows for a a 4-pass match to a 90.7-tonne (100-ton) truck in all applications. Better diggi…
Tire Slip Prevention, which reduces rimpull when there is less downforce on the tire and increases rimpull when there is more down…
Reduced time spent on regular maintenance procedures thanks to features such as ground-level or platform access to filters; groupe…
Ideal for all temperatures, with high ambient package for operation in temperatures as high as 55 degrees C / 131 degrees F; and c…
New C32B engine improved for increased durability. Use of structural castings at the high-stress locations where the lift ar…
Cat MineStar™ Terrain for loading, which provides real-time feedback on payloads and design plan progress to increases productivit…
Designed to be more efficient and use less fuel, which reduces engine emissions and carbon footprint; Tier 4 Final engine reduces…
Specification | Value |
Net Power | 607 kW |
Engine Model | Cat® C32B |
Emissions | U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent |
Rated Speed | 1750 rpm |
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard | 671 kW |
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient | 699 kW |
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard | 676 kW |
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient | 704 kW |
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard | 659 kW |
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient | 687 kW |
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard | 666 kW |
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient | 694 kW |
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard | 607 kW |
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient | 607 kW |
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard | 614 kW |
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient | 614 kW |
Bore | 145 mm |
Stroke | 162 mm |
Displacement | 32.1 l |
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm | 4.765 N·m |
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm | 4.820 N·m |
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm | 4.796 N·m |
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm | 4.841 N·m |
Specification | Value |
Operating Weight | 105.882 kg |
Rated Payload - Standard | 23.1 t |
Rated Payload - Standard (Material Handler) | 27.2 t |
Rated Payload - High Lift | 20.4 t |
Rated Payload - High Lift (Material Handler) | 24.5 t |
Bucket Capacity Range | 11.5-24.5 m³ (15-32 yd³) |
Cat Truck Match - Standard | 775/777 |
Cat Truck Match - High Lift | 785 |
Specification | Value |
Bucket Capacities | 11.5-24.5 m³ (15-32 yd³) |
Specification | Value |
Transmission Type | Cat Planetary Powershift |
Forward - 1 | 7 km/h |
Forward - 2 | 11.9 km/h |
Forward - 3 | 20.5 km/h |
Direct Drive - Forward 1 | Disabled |
Direct Drive - Forward 2 | 12.9 km/h |
Direct Drive - Forward 3 | 22.6 km/h |
Reverse - 1 | 7.5 km/h |
Reverse - 2 | 13 km/h |
Reverse - 3 | 22.4 km/h |
Direct Drive - Reverse 1 | 8 km/h |
Direct Drive - Reverse 2 | 14.2 km/h |
Direct Drive - Reverse 3 | 24.7 km/h |
Specification | Value |
Lift/Tilt System - Circuit | Positive Flow Control |
Lift/Tilt System - Pump | Variable Displacement Piston |
Maximum Flow at 2,165 rpm | 950 l/min |
Relief Valve Setting - Lift/Tilt | 34.500 kPa |
Lift Cylinder - Bore | 235 mm |
Lift Cylinder - Stroke | 1.613 mm |
Tilt Cylinder - Bore | 292 mm |
Tilt Cylinder - Stroke | 1.055 mm |
Specification | Value |
Rack Back | 2.3 s |
Rack Back - High Lift | 2.3 s |
Raise | 9 s |
Raise - High Lift | 9 s |
Dump | 2.6 s |
Dump - High Lift | 2.6 s |
Float Down | 3.2 s |
Float Down - High Lift | 3.2 s |
Total Hydraulic Cycle Time | 17.1 s |
Specification | Value |
Fuel Tank | 1.460 l |
Cooling Systems | 225 l |
Crankcase | 120 l |
Transmission | 195 l |
Differential - Final Drives - Front | 365 l |
Differential - Final Drives - Rear | 365 l |
Hydraulic System Factory Fill (Implement) | 394 l |
Hydraulic Tank - Implement | 228 l |
Hydraulic Factory Fill (Steering) | 123 l |
Hydraulic Tank (Steering Tank Only) | 99.5 l |
Specification | Value |
Front | Fixed |
Rear | Trunnion |
Oscillation Angle | ±9° |
Specification | Value |
Brakes | ISO 3450:2011 |
Specification | Value |
Steering System - Circuit | Pilot, Load Sensing |
Steering System - Pump | Piston, Variable Displacement |
Maximum Flow at 1,400-1,850 rpm | 265 l/min |
Steering Cut Off Pressure | 31.000 kPa |
Total Steering Angle | 80° |
Steering Cycle Times - Low Idle | 4.9 s |
Steering Cycle Times - High Idle | 3.1 s |
Specification | Value |
Ambient Capability Hydraulically Driven Demand Fan - Standard | 43 °C |
Ambient Capability, Hydraulically Driven Demand Fan - High | 55 °C |
Specification | Value |
Note | Machine Sound Level (ISO 6396:2008) - 116 dB(A) |
Specification | Value |
Note | Machine Sound Level (ISO 6396:2008) - 113 dB(A) |
Specification | Value |
Ground to Top of Exhaust Stacks | 5.169 mm |
Ground to Top of ROPS | 5.571 mm |
Ground to Top of Hood | 3.983 mm |
Ground to Center of Front Axle | 1.308 mm |
Ground to Bumper Clearance | 1.145 mm |
Ground to Lower Hitch Clearance | 666 mm |
Reach - Maximum Lift | 2.503 mm |
Clearance at Maximum Lift | 4.630 mm |
B-Pin Height - Maximum Lift | 6.948 mm |
Maximum Overall Height - Bucket Raised | 9.390 mm |
Rear Axle - Centerline to Bumper | 4.119 mm |
Tread Width | 3.302 mm |
Rack Back Angle - Maximum Lift | 56.9 degrees |
Dump Angle at Maximum Lift | -49.5 degrees |
Rack Back Angle - Ground Level | 40.2 degrees |
Width - Over Tires - With Bulge | 4.493 mm |
Wheel Base | 5.890 mm |
Rack Back Angle - Carry | 48.9 degrees |
Maximum Overall Length | 15.489 mm |
Front Axle Centerline to Bucket Tip | 5.480 mm |
Specification | Value |
Tread Width | 3.302 mm |
Rack Back Angle - Ground Level | 42.5 degrees |
Dump Angle at Maximum Lift | -48.1 degrees |
Rack Back Angle - Maximum Lift | 56.2 degrees |
Width - Over Tires - With Bulge | 4.495 mm |
Rack Back Angle - Carry | 51.6 degrees |
Ground to Top of Exhaust Stacks | 5.169 mm |
Ground to Top of ROPS | 5.571 mm |
Ground to Top of Hood | 3.983 mm |
Ground to Center of Front Axle | 1.308 mm |
Ground to Bumper Clearance | 1.145 mm |
Ground to Lower Hitch Clearance | 666 mm |
Reach - Maximum Lift | 2.319 mm |
Clearance at Maximum Lift | 5.256 mm |
B-Pin Height - Maximum Lift | 7.465 mm |
Maximum Overall Height - Bucket Raised | 9.759 mm |
Rear Axle - Centerline to Bumper | 4.119 mm |
Wheel Base | 5.890 mm |
Maximum Overall Length | 15.733 mm |
Front Axle Centerline to Bucket Tip | 5.724 mm |
Learn more information about the Cat 992 Wheel Loader.
Download (2.22 MB, PDF)From pre-purchase consults to end-of-lifecycle benefits, Mantrac informs, advises and partners with you.
Speak with the Sales Team to learn the latest prices and information on products that can deliver value and help transform your business.
Find the perfect machine or equipment solution by contacting one of our local specialists. They are on standby, ready to help you solve your operational challenges.
Mantrac Djibouti
DAMAL COMPLEX Route de la Siesta BP334) Djibouti Republique de Djibouti
Hotline: 25321343408