Fill out our form with your model of interest and we'll send you a downloadable brochure or technical specifications document.
The Cat® 992 Large Wheel Loader has set the standard in its size class for more than 50 years, delivering industry-leading productivity, unparalleled reliability and long life. Today’s 992 raises the bar. Compared to the 992K, the new 992 is up to 48% more efficient and 32% more productive, thanks to higher payload for improved pass match, increases in rimpull and breakout force, and an optimized linkage design. Extended component replacement intervals plus increased filter and turbo life help reduce maintenance costs. These improvements — and many more — combine to provide significant savings over the life of the machine for the lowest owning and operating costs in the industry. With both standard and high-lift configurations, the 992 offers the ideal pass match for fleets of Cat 775, 777 and 785 trucks.
Designed for visibility, with a taller windshield that provides a 25% increase in glass surface area for a better view to the buck…
50% increase in leg room and increased width by the operator’s knees compared to previous model. Reduced vibration, low soun…
Low-effort integrated controls that make cycles smoother and faster while reducing fatigue. Large, easy-to-read, color LED d…
Increased rated payload, which allows for a a 4-pass match to a 90.7-tonne (100-ton) truck in all applications. Better diggi…
Tire Slip Prevention, which reduces rimpull when there is less downforce on the tire and increases rimpull when there is more down…
Reduced time spent on regular maintenance procedures thanks to features such as ground-level or platform access to filters; groupe…
Ideal for all temperatures, with high ambient package for operation in temperatures as high as 55 degrees C / 131 degrees F; and c…
New C32B engine improved for increased durability. Use of structural castings at the high-stress locations where the lift ar…
Cat MineStar™ Terrain for loading, which provides real-time feedback on payloads and design plan progress to increases productivit…
Designed to be more efficient and use less fuel, which reduces engine emissions and carbon footprint; Tier 4 Final engine reduces…
Specification | Value |
Net Power | 5.724 mm |
Engine Model | 18.8 |
Emissions | 18.8 |
Rated Speed | 18.8 |
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard | 5.724 mm |
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient | 5.724 mm |
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard | 5.724 mm |
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient | 5.724 mm |
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard | 5.724 mm |
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient | 5.724 mm |
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard | 5.724 mm |
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient | 5.724 mm |
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard | 5.724 mm |
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient | 5.724 mm |
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard | 5.724 mm |
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient | 5.724 mm |
Bore | 5.724 mm |
Stroke | 5.724 mm |
Displacement | 5.724 mm |
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm | 5.724 mm |
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm | 5.724 mm |
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm | 5.724 mm |
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm | 5.724 mm |
Specification | Value |
Operating Weight | 5.724 mm |
Rated Payload - Standard | 5.724 mm |
Rated Payload - Standard (Material Handler) | 5.724 mm |
Rated Payload - High Lift | 5.724 mm |
Rated Payload - High Lift (Material Handler) | 5.724 mm |
Bucket Capacity Range | 18.8 |
Cat Truck Match - Standard | 18.8 |
Cat Truck Match - High Lift | 18.8 |
Specification | Value |
Bucket Capacities | 18.8 |
Specification | Value |
Transmission Type | 18.8 |
Forward - 1 | 5.724 mm |
Forward - 2 | 5.724 mm |
Forward - 3 | 5.724 mm |
Direct Drive - Forward 1 | 18.8 |
Direct Drive - Forward 2 | 5.724 mm |
Direct Drive - Forward 3 | 5.724 mm |
Reverse - 1 | 5.724 mm |
Reverse - 2 | 5.724 mm |
Reverse - 3 | 5.724 mm |
Direct Drive - Reverse 1 | 5.724 mm |
Direct Drive - Reverse 2 | 5.724 mm |
Direct Drive - Reverse 3 | 5.724 mm |
Specification | Value |
Lift/Tilt System - Circuit | 18.8 |
Lift/Tilt System - Pump | 18.8 |
Maximum Flow at 2,165 rpm | 5.724 mm |
Relief Valve Setting - Lift/Tilt | 5.724 mm |
Lift Cylinder - Bore | 5.724 mm |
Lift Cylinder - Stroke | 5.724 mm |
Tilt Cylinder - Bore | 5.724 mm |
Tilt Cylinder - Stroke | 5.724 mm |
Specification | Value |
Rack Back | 5.724 mm |
Rack Back - High Lift | 5.724 mm |
Raise | 5.724 mm |
Raise - High Lift | 5.724 mm |
Dump | 5.724 mm |
Dump - High Lift | 5.724 mm |
Float Down | 5.724 mm |
Float Down - High Lift | 5.724 mm |
Total Hydraulic Cycle Time | 5.724 mm |
Specification | Value |
Fuel Tank | 5.724 mm |
Cooling Systems | 5.724 mm |
Crankcase | 5.724 mm |
Transmission | 5.724 mm |
Differential - Final Drives - Front | 5.724 mm |
Differential - Final Drives - Rear | 5.724 mm |
Hydraulic System Factory Fill (Implement) | 5.724 mm |
Hydraulic Tank - Implement | 5.724 mm |
Hydraulic Factory Fill (Steering) | 5.724 mm |
Hydraulic Tank (Steering Tank Only) | 5.724 mm |
Specification | Value |
Front | 18.8 |
Rear | 18.8 |
Oscillation Angle | 18.8 |
Specification | Value |
Brakes | 18.8 |
Specification | Value |
Steering System - Circuit | 18.8 |
Steering System - Pump | 18.8 |
Maximum Flow at 1,400-1,850 rpm | 5.724 mm |
Steering Cut Off Pressure | 5.724 mm |
Total Steering Angle | 18.8 |
Steering Cycle Times - Low Idle | 5.724 mm |
Steering Cycle Times - High Idle | 5.724 mm |
Specification | Value |
Ambient Capability Hydraulically Driven Demand Fan - Standard | 5.724 mm |
Ambient Capability, Hydraulically Driven Demand Fan - High | 5.724 mm |
Specification | Value |
Note | 18.8 |
Specification | Value |
Note | 18.8 |
Specification | Value |
Ground to Top of Exhaust Stacks | 5.724 mm |
Ground to Top of ROPS | 5.724 mm |
Ground to Top of Hood | 5.724 mm |
Ground to Center of Front Axle | 5.724 mm |
Ground to Bumper Clearance | 5.724 mm |
Ground to Lower Hitch Clearance | 5.724 mm |
Reach - Maximum Lift | 5.724 mm |
Clearance at Maximum Lift | 5.724 mm |
B-Pin Height - Maximum Lift | 5.724 mm |
Maximum Overall Height - Bucket Raised | 5.724 mm |
Rear Axle - Centerline to Bumper | 5.724 mm |
Tread Width | 5.724 mm |
Rack Back Angle - Maximum Lift | 18.8 |
Dump Angle at Maximum Lift | 18.8 |
Rack Back Angle - Ground Level | 18.8 |
Width - Over Tires - With Bulge | 5.724 mm |
Wheel Base | 5.724 mm |
Rack Back Angle - Carry | 18.8 |
Maximum Overall Length | 5.724 mm |
Front Axle Centerline to Bucket Tip | 5.724 mm |
Specification | Value |
Tread Width | 5.724 mm |
Rack Back Angle - Ground Level | 18.8 |
Dump Angle at Maximum Lift | 18.8 |
Rack Back Angle - Maximum Lift | 18.8 |
Width - Over Tires - With Bulge | 5.724 mm |
Rack Back Angle - Carry | 18.8 |
Ground to Top of Exhaust Stacks | 5.724 mm |
Ground to Top of ROPS | 5.724 mm |
Ground to Top of Hood | 5.724 mm |
Ground to Center of Front Axle | 5.724 mm |
Ground to Bumper Clearance | 5.724 mm |
Ground to Lower Hitch Clearance | 5.724 mm |
Reach - Maximum Lift | 5.724 mm |
Clearance at Maximum Lift | 5.724 mm |
B-Pin Height - Maximum Lift | 5.724 mm |
Maximum Overall Height - Bucket Raised | 5.724 mm |
Rear Axle - Centerline to Bumper | 5.724 mm |
Wheel Base | 5.724 mm |
Maximum Overall Length | 5.724 mm |
Front Axle Centerline to Bucket Tip | 5.724 mm |
Learn more information about the Cat 992 Wheel Loader.
Download (2.22 MB, PDF)From pre-purchase consults to end-of-lifecycle benefits, Mantrac informs, advises and partners with you.
Speak with the Sales Team to learn the latest prices and information on products that can deliver value and help transform your business.
Find the perfect machine or equipment solution by contacting one of our local specialists. They are on standby, ready to help you solve your operational challenges.
Mantrac Amerya - Alexandria
Km.28 Alex-Cairo Desert Road, Amreya, Al Amaria First, Alexandria Governorate, Egypt.
Ask an Expert today!