Wheel Loaders

914K

Overview

The Cat® 914K Compact Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Request a Quote
    • Operating Specifications
      Rated Bucket Capacity 1.9 m³
    • Weights
      Operating Weight 8488 kg
    • Service Refill Capacities
      Axles - Front Center Differential 7.5 l
      Axles - Rear Center Differential 7.5 l
      Cooling System 21.5 l
      Engine Crankcase 8.8 l
      Fuel Tank 154 l
      Hydraulic System - Including Tank 98 l
      Hydraulic Tank 55 l
      Transmission 3.4 l
    • Buckets
      Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
    • Loader Hydraulic System
      Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s
      Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s
      Hydraulic Cycle Time - Rackback 2.2 s
      Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s
      Hydraulic Cycle Time - Total Cycle Time 12.5 s
      Maximum Flow - Implement Pump 148 l/min
      Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 120 l/min
      Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 90 l/min
      Maximum Flow - Implement Pump - 4th Function, Maximum Flow 90 l/min
      Maximum Working Pressure - Implement Pump 28000 kPa
      Relief Pressure - Tilt Cylinder 34000 kPa
      Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 21000 kPa
      Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 21000 kPa
    • Cab
      FOPS ISO 3449:2005 Level II
      Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
      Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
      Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
      Note (4) *The measurements were conducted with the cab doors and windows closed.
      ROPS ISO 3471:2008
    • Transmission
      Forward and Reverse - Low Range, Speed Range 1* 10 km/h
      Forward and Reverse - Low Range, Speed Range 2* 20 km/h
      Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
    • Axles
      Front Fixed; Locking differential (standard)
      Rear Oscillating �11 degrees; Locking differential (Standard)
    • Steering
      Maximum Flow - Steering Pump 82 l/min
      Maximum Working Pressure - Steering Pump 22500 kPa
      Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns
      Steering Articulation Angle - Each Direction 40 °
      Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s
    • Engine
      Bore 105 mm
      Displacement 4.4 l
      Emissions Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.
      Engine Model Cat C4.4
      Maximum Gross Power 74 kW
      Maximum Gross Power - ISO 14396 74 kW
      Maximum Gross Power - ISO 14396 (DIN) 74 kW
      Maximum Gross Power - Maximum Engine Speed 2350 r/min
      Maximum Gross Power - SAE J1995 76 kW
      Maximum Gross Torque - ISO 14396 450 N·m
      Maximum Gross Torque - SAE J1995 455 N·m
      Net Power 72 kW
      Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
      Rated Net Power - ISO 9249 72 kW
      Rated Net Power - ISO 9249 (DIN) 72 kW
      Rated Net Power - Rated Engine Speed 2200 r/min
      Rated Net Power - SAE J1349 72 kW
      Stroke 127 mm
    • Engine - Tier 4 Final/Stage IV
      Maximum Net Torque - ISO 9249 446 N·m
      Maximum Net Torque - SAE J1349 441 N·m
    • Tires
      Note (1) Other tire choices are available. Contact your Cat dealer for details.
      Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
      Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
      Other Choices Include 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
      Standard Size 17.5-25 12PR

    Product Downloads

    914K Product Brochure

Similar Products

Wheel Loaders

950M Millyard

Wheel Loaders

962L

Wheel Loaders

962M Millyard

...

Mantrac Tanzania Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

Newsletter

Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.