Hydraulic Mining Shovels

6015B

Overview

The new Cat 6015B Hydraulic Shovel meets your need to move more material at a lower cost, so you can achieve production targets, deliver on your commitments, meet deadlines – and maximize your profitability. Load more, make more.

Request a Quote
    • Weights
      Ground Pressure 16.3 N/cm²
      Note 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick
      Operating Weight 140 t
    • Electrical System
      Alternator Rating 150A (24V)
      Batteries 4 × 200Ah (12V each)
      Components (1) Emergency stop in cabin, engine module, pump room and on service station accessible from ground level
      Components (2) All around lighting
      Components (3) Four (4) lights on attachment
      Components (4) Five (5) lights for front
      Components (5) Two (2) lights for left side
      Components (6) One (1) light for right side
      Components (7) Two (2) lights for rear end
      Components (8) One (1) light for machine deck/service
      Components (9) One (1) beacon light on cabin roof
      System Voltage 24V
    • Automatic Lubrication System
      Capacity - Grease Barrel 68 l
      Type (1) Central bank lubrication system
      Type (2) Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing
      Type (3) Standard grease reel on machine for bucket linkage
      Type (4) Grease refill service point accessible from ground
    • Backhoe Attachment (BH) - Working Range
      Maximum Digging Depth 7.9 m
      Maximum Digging Height 13.2 m
      Maximum Digging Reach 13.9 m
      Maximum Dump Height 8.7 m
    • Operator's Cab
      Components (1) Pressurized operator station with positive filtration
      Components (10) Radio with MP3 auxiliary audio port
      Components (11) Two stereo speakers
      Components (12) Storage shelf suitable for lunch or toolbox
      Components (13) Color LCD display with warning, filter/fluid change, and working hour information
      Components (14) Adjustable armrest
      Components (15) Height-adjustable joystick consoles
      Components (16) Neutral lever (lock out) for all controls
      Components (17) Travel control pedals with removable hand levers
      Components (18) Two power outlets, 10 amp (total)
      Components (19) Laminated glass front upper window and tempered other windows
      Components (2) Mirror package
      Components (3) Sliding upper door window (left-hand cab door)
      Components (4) Glass-breaking safety hammer
      Components (5) Removable lower windshield with in cab storage bracket
      Components (6) Coat hook
      Components (7) Beverage holder
      Components (8) Literature holder
      Components (9) AM/FM radio
    • Service Refill Capacities
      Cooling System 165 l
      Engine Oil 87 l
      Fuel Tank 1700 l
      Grease Tank 68 l
      Hydraulic System - Including Tank 1752 l
      Hydraulic Tank 956 l
      Swing Drive 9 l
    • Swing System
      Features (1) Closed-loop swing circuit with speed control
      Features (2) Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
      Features (3) All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
      Maximum Swing Speed 4.9 r/min
      Parking Brake Wet multiple disc brake, spring-loaded/hydraulically released
      Swing Drive Two (2) compact planetary transmissions with axial piston motors
      Swing Ring Cross roller bearing with sealed internal gearing
    • General
      Engine Output - SAE J1995 606 kW (813 hp)
      Operating Weight 140 tonnes (154 tons)
      Standard Bucket Capacity Backhoe (heaped 1:1) 8.1 m3 (10.6 yd3)
    • Track
      Extra Wide 1000 mm
      Number of Carrier Rollers - Each Side 3
      Number of Shoes - Each Side 46
      Number of Track Rollers - Each Side 9
      Standard 700 mm
      Track Pads Double grouser
      Wide 900 mm
    • Bucket
      Standard Bucket Capacity - Backhoe (Heaped 1:1) 8.1 m³
    • Engine
      Emissions U.S. EPA Tier 4 Final, Tier 2 Equivalent or Tier 1 Equivalent
      Engine Model Cat® C27 ACERT™
      Gross Power - SAE J1995 606 kW
      Net Power - SAE J1349 556 kW
    • Attachments
      Buckets Equipped With – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds
      Type (1) Boom and stick torsion-resistant with welded box design
      Type (2) High-tensile steel with solid steel castings at pivot areas
      Type (3) Boom and stick stress-relieved after welding
      Type (4) Float valve for boom down function
    • Engine - Cat C27 ACERT with Tier 4 Final Emission Standards
      Bore 137.2 mm
      Displacement 27 l
      Gross Power - SAE J1995 606 kW (813 hp 1,800 min-1)
      Maximum Altitude - Without Deration - Above Sea Level 3048 m
      Net Power - SAE J1349 556 kW (746 hp 1,800 min-1)
      Number of Cylinders 12
      Stroke 152.4 mm
    • Drive
      Gradeability - Travel Drives Approximately 42%
      Hydraulic Track Tensioning With accumulator
      Maximum Drawbar Pull - Forward 858 kN
      Maximum Drawbar Pull - Reverse 983 kN
      Travel Speed - Two Stages - 1st Stage - Maximum 2.3 km/h
      Travel Speed - Two Stages - 2nd Stage - Maximum 3.3 km/h
    • Backhoe Attachment (BH) - Digging Forces
      Bucket Digging Force - ISO 586 kN
      Bucket Digging Force - SAE 501 kN
      Stick Digging Force - ISO 458 kN
      Stick Digging Force - SAE 439 kN
    • Hydraulic System
      Engine Fan Pump 1 × variable swash plate pump
      Engine Fan Pump - Maximum Flow, Engine Fan 201 l/min
      Engine Fan Pump - Maximum Pressure, Engine Fan 220 bar
      Filters (1) Full-flow high-pressure filters (200 μm) for main pumps
      Filters (2) Full-flow filters (20 μm) for complete return circuit
      Filters (3) Pressure filters (16 μm) for servo circuit
      Filters (4) Full-flow filters (6 μm) for engine cooling return circuit
      Filters (5) Swing charge filter (15 μm)
      Filters (6) Pump case return screens (125 μm)
      Hydraulic Fan Pump 1 × variable swash plate pump
      Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan 86 l/min
      Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan 135 bar
      Hydraulic Oil Cooling - Diameter of Fan 1016 mm
      Hydraulic Oil Cooling - Maximum Flow 1075 l/min
      Main Pumps 3 × variable swash plate pumps
      Main Pumps - Maximum Pressure - Attachment 320 bar
      Main Pumps - Maximum Pressure - Travel 320 bar
      Main Pumps - Maximum Total Oil Flow 1544 l/min
      Pilot Pump 1 × gear pump
      Pilot Pump - Maximum Flow, Pilot 153 l/min
      Pilot Pump - Maximum Pressure, Pilot 95 bar
      Swing Pump 1 × variable swash plate pump
      Swing Pump - Maximum Flow - Swing 479 l/min
      Swing Pump - Maximum Pressure - Swing 365 bar
    • Engine - Cat C27 ACERT with Tier 1 or Tier 2 Equivalent Emission Standards
      Aspiration Turbocharged and aftercooled
      Bore 137.2 mm
      Displacement 27 l
      Gross Power - SAE J1995 606 kW (813 hp 1,800 min-1)
      Maximum Altitude - Without Deration - Above Sea Level 4420 m
      Net Power - SAE J1349 556 kW (746 hp 1,800 min-1)
      Number of Cylinders 12
      Stroke 152.4 mm
    • Centralized Service Area
      Equipped With (1) Emergency stop
      Equipped With (2) Quick couplings for: – Diesel fuel – Grease
      Feature Accessible from ground level
    • Operating Specifications
      Bucket Payload 14.6 t
      Operating Weight 140 t
    • Backhoe Attachment (BH) - Backhoe
      Capacity 1:1 8.1 m³
      Maximum Material Density - Loose 1.8 t/m³
      Number of Teeth 5
      Tooth System Cat C70 penetration tip with CapSure lock
      Total Width 2682 mm
      Weight - Including Standard Wear Package 7528 kg
    • Undercarriage
      Components (1) Forged double-grouser track pads
      Components (2) Chain links connected by hardened pins and bushings
      Components (3) Cat D11 Track-Type Tractor links
      Components (4) All running surfaces of sprockets, idlers, rollers and track chain links hardened
      Components (5) Fully hydraulic self-adjusting track tensioning system with accumulator
      Components (6) Automatic hydraulic retarder valve to prevent overspeed on downhill travel
      Components (7) Audible travel alarm
      Gradeability - Travel Drives Approximately 42%
      Hydraulic Track Tensioning With accumulator
      Maximum Drawbar Pull - Forward 858 kN
      Maximum Drawbar Pull - Reverse 983 kN
      Number of Carrier Rollers - Each Side 3
      Number of Shoes - Each Side 46
      Number of Track Rollers - Each Side 9
      Travel Speed - Two Stages - 1st Stage - Maximum 2.3 km/h
      Travel Speed - Two Stages - 2nd Stage - Maximum 3.3 km/h

    Product Downloads

    6015B Product Brochure

Similar Products

Hydraulic Mining Shovels

6050/6050 FS

Hydraulic Mining Shovels

6060 AC/6060 AC FS

Hydraulic Mining Shovels

6060/6060 FS

...

Mantrac Tanzania Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

Newsletter

Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.