This website uses cookies to ensure you get the best experience on our website. Learn More

Motor Graders

16M3

Overview

The 16M3 Motor Grader will have a direct impact on mine site productivity and costs. The haul road is either the mine's greatest asset or greatest liability. When haul roads are kept in top condition, trucks live longer and run faster. Good road conditions are key on extending truck life, reducing maintenance, lowering fuel costs and reducing tire damage, as a result, cycle times are improved and more ore is produced at a lower cost. The 16M3 is ideal fit for:

  • Small to medium size mining operations which run 150 ton or smaller hauling trucks.
  • As a complement to a 24M size motor grader fleet in large mining operations where additional versatility is required for ditch and berm building and cleaning, maintenance of secondary narrower roads or side/bank slope work.
The 16M3 includes features that provide large benefits on operating cost reduction, uptime & performance improvements as well as enhanced safety.

Request a Quote
    • Dimensions (Approximate)
      Ground Clearance - Rear Axle 396 mm
      Height - Exhaust Stack 3557 mm
      Height - Front Axle Center 733 mm
      Height - Top of Cab 3719 mm
      Height - Top of Cylinders 3088 mm
      Length - Between Tandem Axles 1841 mm
      Length - Counterweight to Ripper 12051 mm
      Length - Front Axle to Mid Tandem 7365 mm
      Length - Front Axle to Moldboard 3066 mm
      Length - Front Tire to Rear of Machine - Including Tow Hitch 10593 mm
      Width - Outside Front Tires 3411 mm
      Width - Outside Rear Tires 3411 mm
      Width - Tire Center Lines 2703 mm
    • Hydraulic System
      Circuit Type Electro-hydraulic load sensing, closed center
      Maximum System Pressure 24750 kPa
      Note *Pump output measured at 2,150 rpm.
      Pump Output* 280 l/min
      Pump Type Variable piston
      Standby Pressure 5900 kPa
    • Power Train
      Brakes - Dynamic Brake Torque per Wheel 36701 N·m
      Brakes - Parking Spring applied, hydraulically released
      Brakes - Secondary Oil-actuated, oil-disc
      Brakes - Service Oil-actuated, oil disc
      Forward/Reverse Gears 8 Forward/6 Reverse
      Transmission Direct drive, power shift, countershaft
    • Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
      Gross Vehicle Weight - Base** - Front Axle 8134 kg
      Gross Vehicle Weight - Base** - Rear Axle 20682 kg
      Gross Vehicle Weight - Base** - Total 28816 kg
      Gross Vehicle Weight - Maximum Tested - Front Axle 11850 kg
      Gross Vehicle Weight - Maximum Tested - Rear Axle 26650 kg
      Gross Vehicle Weight - Maximum Tested - Total 38500 kg
      Gross Vehicle Weight - Typically Equipped - Front Axle 8733 kg
      Gross Vehicle Weight - Typically Equipped - Rear Axle 23678 kg
      Gross Vehicle Weight - Typically Equipped - Total 32411 kg
      Note (1) *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
      Note (2) **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.
    • Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
      Gear - Forward 1st 216 kW
      Gear - Forward 2nd 216 kW
      Gear - Forward 3rd 222 kW
      Gear - Forward 4th 227 kW
      Gear - Forward 5th 232 kW
      Gear - Forward 6th 239 kW
      Gear - Forward 7th 244 kW
      Gear - Forward 8th 259 kW
      Gear - Reverse 1st 216 kW
      Gear - Reverse 2nd 216 kW
      Gear - Reverse 3rd-6th 222 kW
    • Weights
      Operating Weight - Typically Equipped 32411 kg
    • Ripper
      Machine Length Increase, Beam Raised 1610 mm
      Penetration Force 13749 kg
      Pry-Out Force 19822 kg
      Ripper Shank Holders 7
      Ripping Depth - Maximum 452 mm
      Shank Holder Spacing - Maximum 500 mm
      Shank Holder Spacing - Minimum 445 mm
    • Blade Range
      Blade Tip Range - Backward
      Blade Tip Range - Forward 40°
      Circle Centershift - Left 690 mm
      Circle Centershift - Right 560 mm
      Maximum Blade Position Angle 65°
      Maximum Depth of Cut 470 mm
      Maximum Lift Above Ground 400 mm
      Maximum Shoulder Reach Outside of Tires - Left 2311 mm
      Maximum Shoulder Reach Outside of Tires - Right 2311 mm
      Moldboard Sideshift - Left 740 mm
      Moldboard Sideshift - Right 790 mm
    • Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
      Gear - Forward 1st 216 kW
      Gear - Forward 2nd 216 kW
      Gear - Forward 3rd 222 kW
      Gear - Forward 4th 227 kW
      Gear - Forward 5th 232 kW
      Gear - Forward 6th 239 kW
      Gear - Forward 7th 244 kW
      Gear - Forward 8th 259 kW
      Gear - Reverse 1st 216 kW
      Gear - Reverse 2nd 216 kW
      Gear - Reverse 3rd-6th 222 kW
    • Optional Tire Arrangements
      Wheel Group - 19.5×25 MP (1) Tires: 23.5R25 Bridgestone VKT 2 Star
      Wheel Group - 19.5×25 MP (2) Tires: 23.5R25 Bridgestone VKT 1 Star
      Wheel Group - 19.5×25 MP (3) Tires: 23.5R25 Bridgestone VJT 1 Star
      Wheel Group - 19.5×25 MP (4) Tires: 23.5R25 Michelin XHA 2 Star
      Wheel Group - 19.5×25 MP (5) Tires: 23.5R25 Michelin XLDD 2 Star L5
    • Operating Specifications
      Articulation Angle - Left/Right 20°
      Forward - 1st 4.5 km/h
      Forward - 2nd 6.1 km/h
      Forward - 3rd 8.9 km/h
      Forward - 4th 12.3 km/h
      Forward - 5th 19 km/h
      Forward - 6th 25.8 km/h
      Forward - 7th 35.5 km/h
      Forward - 8th 51.7 km/h
      Note Calculated with no slip and 23.5 R25 L-3 tires.
      Reverse - 1st 3.6 km/h
      Reverse - 2nd 6.6 km/h
      Reverse - 3rd 9.7 km/h
      Reverse - 4th 15 km/h
      Reverse - 5th 28 km/h
      Reverse - 6th 40.8 km/h
      Steering Range - Left/Right 47.5°
      Top Speed - Forward 51.7 km/h
      Top Speed - Reverse 40.8 km/h
      Turning Radius - Outside Front Tires 9.3 m
    • Standards
      Brakes ISO 3450:2011
      Note (1) The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The machine was equipped with a sound suppression system.
      Note (2) The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and the cab windows closed. The cab was properly installed and maintained. The machine was equipped with a sound suppression system.
      ROPS/FOPS ISO 3471:2008/ISO 3449:2005
      Sound ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
      Steering ISO 5010:2007
    • Frame
      Circle - Blade Beam Thickness 50 mm
      Circle - Diameter 1822 mm
      Drawbar - Height 203 mm
      Drawbar - Width 76 mm
      Front Axle - Height to Center 670 mm
      Front Axle - Total Oscillation per Side 35°
      Front Axle - Wheel Lean 18° Left/17° Right
      Front Frame Structure - Height 460 mm
      Front Frame Structure - Thickness 14 mm
      Front Frame Structure - Width 356 mm
    • Tandems
      Drive Chain Pitch 63.5 mm
      Height 648 mm
      Sidewall Thickness - Inner 22 mm
      Sidewall Thickness - Outer 22 mm
      Tandem Oscillation - Front Down 25°
      Tandem Oscillation - Front Up 15°
      Wheel Axle Spacing 1841 mm
      Width 236 mm
    • Moldboard
      Arc Radius 413 mm
      Blade Pull* - Base GVW 18615 kg
      Blade Pull* - Maximum GVW 23985 kg
      Blade Width 4.9 m
      Cutting Edge Thickness 25 mm
      Cutting Edge Width 203 mm
      Down Force - Base GVW 13945 kg
      Down Force - Maximum GVW 19895 kg
      End Bit - Thickness 19 mm
      End Bit - Width 152 mm
      Height 787 mm
      Note *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
      Thickness 25 mm
      Throat Clearance 126 mm
      Width 4.9 m
    • Service Refill
      Circle Drive Housing 10 l
      Cooling System 70 l
      DEF Tank 16 l
      Engine Oil 36 l
      Front Wheel Spindle Bearing Housing 0.9 l
      Fuel Capacity 496 l
      Hydraulic System - Tank 70 l
      Hydraulic System - Total 146 l
      Tandem Housing - Each 129 l
      Transmission - Differential - Final Drives 98.5 l
    • Engine
      Base Power (1st Gear) - Net 216 kW
      Base Power (1st Gear) - Net - Metric 216 kW
      Bore 130 mm
      Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 3954 m
      Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 3711 m
      Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) 3810 m
      Displacement 12.5 l
      Emissions (1) U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)
      Emissions (2) Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country
      Emissions (3) Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country
      Engine Model Cat® C13 ACERT™ VHP
      Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1721 N·m
      Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1721 N·m
      Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) 1771 N·m
      Number of Cylinders 6
      Optimized VHP Range - Net 216-259 kW (290-348 hp)
      Speed at Rated Power 2,000 rpm
      Standard - Ambient Capability 50 °C
      Standard - Fan Speed - Maximum 1,450 rpm
      Standard - Fan Speed - Minimum 550 rpm
      Stroke 157 mm
      Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 39%
      Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 39%
      Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) 43%
      VHP Range - Net 216-259 kW (290-348 hp)
      VHP Range - Net - Metric 216-259 kW (294-353 hp)

    Product Downloads

    16M3 Product Brochure

Similar Products

Motor Graders

140 GC

Motor Graders

140K

Motor Graders

14M3

...

Mantrac Group Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

Newsletter

Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.