This website uses cookies to ensure you get the best experience on our website. Learn More

Motor Graders



Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14M3 features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14M3 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.

Request a Quote
    • Frame
      Circle - Outer Diameter 1822 mm
      Front Axle - Total Oscillation per Side 32°
      Front Axle - Wheel Lean - Left/Right 17.1°
    • Moldboard
      Arc Radius 413 mm
      Blade Height - With Cutting Edge 631 mm
      Blade Height - Without Cutting Edge 585 mm
      Blade Width 4.2 m
      Blade Width - With End Bits 4290 mm
      Blade Width - Without End Bits 4166 mm
      Throat Clearance 117 mm
    • Blade Range
      Blade Tip Range - Backward
      Blade Tip Range - Forward 40°
      Circle Centershift - Left 650 mm
      Circle Centershift - Right 520 mm
      Maximum Depth of Cut 593 mm
      Maximum Lift Above Ground 419 mm
      Maximum Shoulder Reach Outside of Tires - Left 1870 mm
      Maximum Shoulder Reach Outside of Tires - Right 2004 mm
      Moldboard Sideshift - Left 740 mm
      Moldboard Sideshift - Right 790 mm
    • Weights
      Gross Vehicle Weight - Base* - Front Axle 6344 kg
      Gross Vehicle Weight - Base* - Rear Axle 16780 kg
      Gross Vehicle Weight - Base* - Total 23124 kg
      Gross Vehicle Weight - Typically Equipped - Front Axle 6915 kg
      Gross Vehicle Weight - Typically Equipped - Rear Axle 19053 kg
      Gross Vehicle Weight - Typically Equipped - Total 25968 kg
      Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
      Operating Weight - Typically Equipped 25968 kg
    • Air Conditioning System
      Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
    • Engine
      Base Power (1st Gear) - Net 178 kW
      Bore 130 mm
      Displacement 12.5 l
      Emissions Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
      Engine Model Cat C13 ACERT VHP
      Maximum Altitude - Full Power 4237 m
      Maximum Altitude - Full Power (Tier 2) 3672 m
      Maximum Altitude - Full Power (Tier 3) 4374 m
      Maximum Torque - VHP Plus 1542 N·m
      Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
      Note (2) Optimized VHP Plus is standard for the 14M3.
      Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
      Note (4) Power as declared per ISO 14396 – Rated rpm 1,850 – VHP = 228 kW (306 hp)
      Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
      Number of Cylinders 6
      Speed at Rated Power 1,850 rpm
      Standard - Fan Speed - Maximum 1,600 rpm
      Standard - Fan Speed - Minimum 550 rpm
      Standard Capability 50 °C
      Stroke 157 mm
      Torque Rise 41%

    Product Downloads

    14M3 Product Brochure

    14M3 Key Features and Benefits

Similar Products

Motor Graders


Motor Graders

140 GC

Motor Graders



Mantrac Group Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.


Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.