Dozers

D9R

Overview

Engineered for demanding work. The D9R's durable construction is made for tough working conditions. It keeps material moving with the reliability and low operating costs you expect from Cat dozers.

Request a Quote
    • Hydraulic Controls
      Bulldozer Relief Valve Setting 26200 kPa
      Note (1) Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
      Note (2) Complete system consists of pump, tank with filter, valves, lines, linkage and control levers.
      Pump Output - Implement 239 l/min
      Pump Type Piston-type geared from flywheel
      Ripper - Lift - Relief Valve Setting 26200 kPa
      Ripper - Pitch - Relief Valve Setting 26200 kPa
      Tilt Cylinder Flow - Head End Flow 167 l/min
      Tilt Cylinder Flow - Rod End Flow 137 l/min
      Tilt Cylinder Relief Valve Setting 19300 kPa
    • Service Refill Capacities
      Cooling System 163 l
      Engine Crankcase* 45.5 l
      Final Drive - Each 15 l
      Fuel Tank 889 l
      Hydraulic Tank 77.2 l
      Note * With oil filters.
      Pivot Shaft Compartment 30 l
      Power Train 164 l
      Roller Frames - Each 45 l
    • Rippers - Adjustable Parallelogram Single-Shank Standard/Deep
      Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 882 mm/817 mm (34.7 in/32.2 in)
      Maximum Penetration - Standard Tip 1231 mm/1727 mm (48.5 in/68 in)
      Maximum Penetration Force - Shank Vertical 158 kN/172 kN (35,520 lbf/38,667 lbf)
      Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
      Note (2) Single-shank ripping arrangement weight includes pin puller.
      Number of Shank Holes 3-Mar
      Overall Beam Width NA
      Pry-Out Force 332 kN/331 kN (74,637 lbf/74,412 lbf)
      Total Operating Weight* - With SU-Blade and Ripper 48784 kg
      Weight - With One Shank 4293 kg/4420 kg (9,464 lb/9,744 lb)
    • Transmission
      1 Forward 3.9 km/h
      1 Forward - Drawbar Pull 725000 N
      1 Reverse 4.7 km/h
      2 Forward 6.8 km/h
      2 Forward - Drawbar Pull 400000 N
      2 Reverse 8.4 km/h
      3 Forward 11.9 km/h
      3 Forward - Drawbar Pull 218000 N
      3 Reverse 14.7 km/h
    • Weights
      Note (1) Operating Weight: Includes clutch/brake arrangement, lubricant, coolant, 100% fuel, hydraulic controls and fluids, 610 mm (24 in) extreme service shoes, SU-Blade, single-shank ripper, ROPS, FOPS cab and operator.
      Note (2) Shipping Weight: Includes clutch/brake arrangement, lubricants, coolant, 20% fuel and ROPS, FOPS cab and 610 mm (24 in) extreme service shoes.
      Operating Weight 48784 kg
      Shipping Weight 36154 kg
    • Blades - 9U
      Capacity - SAE J1265 16.4 m³
      Digging Depth 606 mm
      Ground Clearance 1422 mm
      Height 1934 mm
      Maximum Tilt 1014 mm
      Note (1) * Includes blade tilt cylinder.
      Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
      Total Operating Weight** - With Blade and Single-Shank Ripper 49392 kg
      Weight* - Without Hydraulic Controls 7388 kg
      Width - Over End Bits 4650 mm
    • Rippers - Adjustable Parallelogram+Multi-shank
      Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 879 mm
      Maximum Penetration - Standard Tip 798 mm
      Maximum Penetration Force - Shank Vertical 154 kN
      Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
      Note (2) Includes (1) shank, add 347 kg for each additional shank.
      Number of Shank Holes 2
      Overall Beam Width 1330 mm
      Pry-Out Force - Multi-Shank Ripper with One Tooth 361 kN
      Total Operating Weight* - With SU-Blade and Ripper 48221 kg
      Weight - With One Shank 4153 kg
    • Blades - 9SU
      Capacity - SAE J1265 13.5 m³
      Digging Depth 606 mm
      Ground Clearance 1422 mm
      Height 1934 mm
      Maximum Tilt 940 mm
      Note (1) * Includes blade tilt cylinder.
      Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
      Total Operating Weight** - With Blade and Single-Shank Ripper 48784 kg
      Weight* - Without Hydraulic Controls 6863 kg
      Width - Over End Bits 4310 mm
    • Winches
      Drum Width 320 mm
      Increased Tractor Length 557 mm
      Maximum Drum Capacity - Optional Cable Length 62 m
      Maximum Drum Capacity - Recommended Cable Length 78 m
      Note (1) * Weight: Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
      Note (2) Variable speed, hydraulically driven, dual braking system, three‑roller fairlead.
      Oil Capacity 15 l
      Weight* 1790 kg
      Winch Model PA140VS
      Wire Cable Diameter - Optional 32 mm
      Wire Cable Diameter - Recommended 28 mm
      Wire Cable Ferrule Size - Length 70 mm
      Wire Cable Ferrule Size - Outside Diameter 60 mm
    • Engine
      Bore 137 mm
      Displacement 18 l
      Emissions Optional U.S. EPA Tier 1 Equivalent
      Engine Model Cat® 3408C
      Engine Power - EU 80/1269 302 kW
      Engine Power - Gross Power - SAE J1995* 330 kW
      Engine Power - Net Power - SAE J1349/ISO 9249 302 kW
      Flywheel Power 302 kW
      Net Power - SAE J1349/ISO 9249 302 kW
      Note * Excludes all fan losses.
      Note (1) Capable of meeting U.S. EPA Tier 1 Equivalent.
      Note (2) Engine ratings apply at 1,900 rpm.
      Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
      Note (4) No derating required up to 2286 m (7,500 ft) altitude.
      Stroke 152 mm
    • Dimensions (Approximate)
      Drawbar Height (Center of Clevis)* 765 mm
      Ground Clearance* 596 mm
      Height - FOPS Cab* 3820 mm
      Height - ROPS/Canopy* 4000 mm
      Height - Top of Stack* 4005 mm
      Length - Basic Tractor - With Drawbar 5180 mm
      Length - Basic Tractor - With Winch 5545 mm
      Length - Track on Ground 3470 mm
      Length - With Multi-Shank Ripper 6538 mm
      Length - With Single-Shank Ripper 6529 mm
      Length - With SU-Blade** 6880 mm
      Length - With U-Blade 6967 mm
      Note (1) *Includes grouser height for total dimensions on hard surfaces.
      Note (2) **Includes drawbar.
      Overall Length - Basic Tractor 4910 mm
      Overall Length - SU-Blade/SS Ripper 8230 mm
      Track Gauge 2250 mm
      Width - Over Trunnions 3300 mm
      Width - Without Trunnions - Standard Shoe 2880 mm
    • Standards
      Brakes Brakes meet the standard ISO 10265.
      FOPS FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
      Note Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.
      ROPS ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
      Sound The declared dynamic operator sound pressure level is 85 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed.
    • Undercarriage
      Ground Clearance 596 mm
      Ground Contact Area 4.24 m²
      Grouser Height - Extreme Service (ES) 84 mm
      Length - Track on Ground 3470 mm
      Note Positive Pin Retention Track.
      Pitch 240 mm
      Shoe Type Extreme Service
      Shoes/Side 43
      Track Gauge 2250 mm
      Track Rollers/Side 8
      Width - Shoe 610 mm

    Product Downloads

    Nobody Moves More Brochure

    D9R Product Brochure

Similar Products

Dozers

D11

Dozers

D3K2 Shiphold / Port Handling

Dozers

D3K2

...

Mantrac Nigeria Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

Newsletter

Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.