Articulated Trucks

745

Overview

The Cat 745 with a 25 m3 (32.7 yd3) 41 tonnes (45.2 tons) capacity brings a new level of operator comfort and features to the market in addition to the durability, high productivity and lower operating costs Cat Articulated Trucks are known for.
The all-new operator cabin is a leap into the next generation for Articulated Trucks, providing our operators the best place to help build the future.

Request a Quote
    • Optimal Loader/Truck Pass Matching
      Hydraulic Excavator: 374 - Passes 5
      Hydraulic Excavator: 390 - Passes 4
      Note An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
      Wheel Loader: 972 - Passes 4-5
      Wheel Loader: 980 - Passes 4-5
      Wheel Loader: 982 - Passes 4
    • Engine
      Bore 145 mm
      Displacement 18.1 l
      Emissions Equivalent to Tier 2/Stage II.
      Engine Model Cat® C18 ACERT™
      Engine Model - Equivalent to U.S. EPA Tier 2 and EU Stage II Cat C18 ACERT
      Gross Power - SAE J1995 381 kW
      Net Power - ISO 14396 376 kW
      Net Power - SAE J1349 370 kW
      No Engine De-rating Required Below 3050 m
      Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
      Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
      Note (3) Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions.
      Peak Engine Torque Gross (SAE J1995) 2618 N·m
      Peak Engine Torque Net (SAE J1349) 2558 N·m
      Peak Engine Torque Speed 1200 r/min
      Stroke 183 mm
    • Body Capacities
      Heaped (SAE 2:1) 25 m³
      Struck 18.5 m³
      Tailgate Heaped SAE 2:1 26.5 m³
      Tailgate Struck 19.5 m³
    • Service Refill Capacities
      Axles - Each 60 l
      Brake Cooling Tank 67 l
      Cooling System 90 l
      DEF Tank 25 l
      Engine Crankcase 52 l
      Final Drive - Each 5 l
      Fuel Tank 550 l
      Steering/Hoist Hydraulic System 140 l
      Transmission - OTG 75 l
    • Steering
      Lock to Lock 4.8 seconds @ 60 rpm
    • Standards
      Brakes ISO 3450 – 2011
      Cab - FOPS ISO 3449 Level II
      Cab - ROPS ISO 3471 – 2008
      Steering ISO 5010 – 2007
    • Body Plate
      Base 14 mm
      Chute 14 mm
      Front 7 mm
      Side 11 mm
      Type High Strength Brinell HB450 Wear Resistant Steel
    • Weights
      Rated Payload 41 t
    • Transmission
      Forward - 1 6.1 km/h
      Forward - 2 8.1 km/h
      Forward - 3 11.2 km/h
      Forward - 4 14.1 km/h
      Forward - 5 18.7 km/h
      Forward - 6 22.9 km/h
      Forward - 7 31.5 km/h
      Forward - 8 37.9 km/h
      Forward - 9 54.8 km/h
      Reverse - 1 6.4 km/h
      Reverse - 2 14.6 km/h
    • Operating Weights
      Center Axle - Empty 7022 kg
      Center Axle - Loaded 24572 kg
      Center Axle - Rated Load 17550 kg
      Front Axle - Empty 19161 kg
      Front Axle - Loaded 25061 kg
      Front Axle - Rated Load 5900 kg
      Rear Axle - Empty 6760 kg
      Rear Axle - Loaded 24310 kg
      Rear Axle - Rated Load 17550 kg
      Total - Empty 32943 kg
      Total - Loaded 73943 kg
      Total - Rated Load 41000 kg
    • Sound Levels
      Interior Cab 72 dB(A)
      Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
      Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
    • Body Hoist
      Lower (automatic) 10 s
      Lower (manual) 10 s
      Raise (automatic) 13 s
      Raise (manual) 12 s
    • Turning Circle
      Note Dimensions are for machines equipped with 29.5R25 tires.
      Turning Dimensions - Aisle Width 5917 mm
      Turning Dimensions - Clearance Radius 9082 mm
      Turning Dimensions - Inside Radius 4413 mm
      Turning Dimensions - SAE Turning Radius 8625 mm
      Turning Dimensions - Steer Angle - Left/Right 45°

    Product Downloads

    745 Product Brochure

Similar Products

Articulated Trucks

730 EJ

Articulated Trucks

730C2 Bare Chassis

Articulated Trucks

735

...

Mantrac Liberia Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

Newsletter

Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.