This website uses cookies to ensure you get the best experience on our website. Learn More

Hydraulic Mining Shovels

6060 AC/6060 AC FS

Overview

We understand the challenges you face, the importance of reliability, and the relationship between uptime and productivity. That’s why we continually strive to produce the safest, most reliable and productive hydraulic mining shovels possible. Offering the widest payload range of any manufacturer in the industry, the ability to optimally pair with our popular line of mining trucks, and the support of our world-class Cat® dealer network, we are uniquely positioned to partner with you to help achieve your productivity targets. We understand what matters to you. Our hydraulic mining shovels are built with you in mind. Because in mining, every day matters and every load counts.

Request a Quote
    • Hydraulic Oil Cooling
      Components Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
      Diameter - Fan 4 × 1170 mm (4 × 46 in)
      Features (1) Cooling system is fully independent of all main circuits, i.e. controlled cooling capacity is available whenever motor is running
      Features (2) Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
      Features (3) Fan speed and flow of oil to the coolers are thermostatically controlled
      Features (4) Extremely high cooling efficiency to ensure optimum oil temperature
      Oil Flow of Cooling Pumps 2 × 486/2 × 474 L/min (2 × 128/2 × 125 gal/min)
    • Electrical System
      Batteries in Series/Parallel Installation 6 × 210 Ah – 12V each; 630 Ah – 24V in total
      Components (1) Battery isolation relays and switches
      Components (2) Emergency stop switches accessible from ground level and in engine module
      Components (3) 12 LED high-brightness working flood lights
      – 10 for working area
      – 2 for rear end
      Components (4) 2 LED high-brightness access flood lights
      Components (5) 16 LED service lights
      System Voltage 24V
    • Retractable Service Station
      Equipped With (1) Quick couplings for:
      – Pump transmission gear oil – left/right
      – Hydraulic oil tank
      – Grease container
      Equipped With (2) Cat jump-start socket
      Equipped With (3) Indicator lights for fuel tanks left/right full and grease container full
      Installation Retractable service station installed underneath the engine module and easily accessible from ground.
    • Features
      Feature (1) TriPower shovel attachment
      Feature (10) LED working lights
      Feature (2) Independent oil-cooling system
      Feature (3) Spacious walk-through machine house
      Feature (4) 5-circuit hydraulic system
      Feature (5) On-board electronics system: Control and Monitoring Platform (CAMP)
      Feature (6) Board Control System (BCS)
      Feature (7) Operator Assist (OA)
      Feature (8) Torque control in closed-loop swing circuit
      Feature (9) Automatic central lubrication system
    • Standard Bucket Capacity
      Backhoe (heaped 1:1) 34 m³
      Face Shovel (heaped 2:1) 34 m³
    • Operator's Cab
      Board Control System (BCS III) Electronic monitoring, data logging and diagnostic system for vital signs and service data of engines, hydraulic system and lubrication system, featuring:
      – Robust instrument panel including large (12 in) colored touch screen for intuitive handling
      – On-screen PDF documentation (e.g. operating instructions, technical handbook, spare parts catalog, electric circuit diagram)
      – On-screen troubleshooting assistance
      – Graphic charts of logged data
      – Fault memory with storage of related conditions
      – USB, Lan (TCP/IP) and CAN BUS interfaces for data export
      Components (1) Under roof mounted heating ventilating and air conditioning system
      Components (10) External sun shields at side and rear windows
      Components (11) Robust instrument panel including large colored BCS screen with transflective technology
      Components (12) Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of electric motor, hydraulic system and lubrication system
      Components (13) Machine access via retractable access stairway, stairway angle approximately 35°, hydraulically operated
      Components (14) Sliding emergency ladder (kick-down type) with ladder cage
      Components (2) Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests
      Components (3) Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
      Components (4) Joystick controls integrated in independently adjustable seat consoles
      Components (5) Fold-away auxiliary seat with safety belt
      Components (6) Operator Protective Guard (Top Guard approved according to ISO 10262:1998)
      Components (7) All-round safety glass, armored windshield and sliding side window
      Components (8) Windshield with parallel intermittent wiper/washer
      Components (9) Roller blinds at all windows
      Internal Dimensions of Cab - Height 2150 mm
      Internal Dimensions of Cab - Length 2200 mm
      Internal Dimensions of Cab - Width 1600 mm
      Operator's Eye Level - Approximately 7.6 m
    • Electric Motor - 6060 AC/6060 AC FS
      Components (1) Custom-made electric motor with increased gap between rotor and stator to withstand severe mining conditions
      Components (2) Power limit control by Pump Managing System
      Frequency 50 Hz (60 Hz on request)
      Maximum Operational Altitude 2000 m above sea level (6,600 ft above sea level)
      Output 1800 kW
      Rated Current IN 185 A (at 6.6 kV)
      Revolutions 1,500 min-1 (1,800 min-1 at 60 Hz)
      Starting current 450% of IN (253% of IN Optional)
      Type Squirrel cage induction motor
      Voltage 6.6 kV ± 10% (other on request)
    • Diesel Engines
      Alternators 2 × 150 A
      Aspiration Turbocharged and charge air-cooled
      Bore 170 mm
      Components (1) Additional high-capacity water separator
      Components (2) Two-stage fuel filter including water separator
      Components (3) Heavy-duty air filters
      Components (4) Microprocessed engine management
      Components (5) Hydraulically driven radiator fan with electronically controlled fan speed
      Displacement 58.6 l
      Emissions Emit equivalent to U.S. EPA Tier 2
      Fuel Tank Capacity 13000 l
      Gross Power - SAE J1995 2236 kW
      Make/Model 2 × Cat 3512C
      Maximum Altitude without Deration 3500 m (11,500 ft) – above sea level
      Net Power - ISO 9249 2215 kW
      Net Power - SAE J1349 2209 kW
      Number of Cylinders - Each Engine 12
      Rated Speed 1,800 min-1 (1,800 rpm)
      Stroke 215 mm
    • Electric Motor
      Output 1800 kW
    • General
      Electric Motor - Output 1800 kW (2,414 hp)
      Engine Output - SAE J1995 Cat 3512C - 2236 kW (2,996 hp)
      Operating Weight Face Shovel - 549 tonnes (605 tons); Backhoe - 548 tonnes (604 tons)
      Standard Bucket Capacity Face Shovel (heaped 2:1) - 34.0 m³ (44.5 yd³); Backhoe (heaped 1:1) - 34.0 m³ (44.5 yd³)
    • Bucket
      Bucket Capacity - Backhoe (heaped 1:1) 34 m³
      Bucket Capacity - Front Shovel (heaped 2:1) 34 m³
    • Operating Weights
      6060 - Ground Pressure 26.3 N/cm² (38.1 psi)
      6060 - Operating Weight 589000 kg
      6060 - Standard Track Pads 1400 mm
      6060 AC - Ground Pressure 24.5 N/cm² (35.6 psi)
      6060 AC - Operating Weight 548000 kg
      6060 AC - Standard Track Pads 1400 mm
      6060 AC FS - Ground Pressure 24.5 N/cm² (35.6 psi)
      6060 AC FS - Operating Weight 54900 kg
      6060 AC FS - Standard Track Pads 1400 mm
      6060 FS - Ground Pressure 26.4 N/cm² (38.3 psi)
      6060 FS - Operating Weight 590000 kg
      6060 FS - Standard Track Pads 1400 mm
      Note Other track pads available on request.
    • Hydraulic System with Pump Managing System
      Features (1) Pressure cut-off for main pumps
      Features (2) Cooling of pump transmission gear oil
      Filters – Full-flow high-pressure filters (100 μm) for the main pumps, installed directly behind each pump
      – High pressure filters (200 μm) for the closed swing circuit
      – Full-flow filters (10 μm) for the complete return circuit
      – Pressure filters (40 μm and 6 μm) for servo circuit
      – Pressure filters (40 μm) for the feed pumps of the closed swing circuit
      – Transmission oil filters (40 μm)
      Hydraulic Tank Capacity - Approximately 5100 l
      Main Pumps 4 × variable flow axial piston pumps
      Maximum Oil Flow - Main Pumps 4 × 925 L/min (4 × 244 gal/min)
      Maximum Oil Flow - Swing Pumps 3 × 486 L/min (3 × 128 gal/min)
      Maximum Pressure - Attachment 320 bar
      Maximum Pressure - Swing Pumps 370 bar
      Maximum Pressure - Travel 370 bar
      Pump Managing System contains: – Electronic power limit control
      – Flow on demand from main pumps depending on joystick position
      – Automatic regulation of main pumps to zero flow without demand
      – Automatic oil flow reduction of main pumps at:
      • Low line voltage to prevent overheating of motor
      • Hydraulic temperature below 20° C (68° F)
      • Preset maximum hydraulic temperature
      • Preset maximum motor temperature
      Swing Pumps 3 × reversible swash plate pumps
      Total Volume of Hydraulic Oil - Approximately 7300 l
    • Engine
      Engine Model 2 × Cat® 3512C
      Gross Power - SAE J1995 2236 kW
      Net Power - SAE J1349 2209 kW
    • Swing System
      Features (1) Closed-loop swing circuit with torque control
      Features (2) Hydraulic braking of the swing motion by counteracting control
      Features (3) All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
      Features (4) Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
      Maximum Swing Speed 3.8 r/min
      Parking Brakes Wet multiple disc brake, spring loaded/hydraulically released
      Swing Drive 4 compact planetary transmissions with axial piston motors
      Swing Ring Triple-race roller bearing with sealed internal gearing
    • Attachments
      All buckets (FS and BH) are equipped with a wear package consisting of: (1) – Special liner material covering main wear areas inside and outside of bucket
      – Lip shrouds between teeth
      – Wing shrouds on side walls
      – Heel shrouds at bottom edges
      All buckets (FS and BH) are equipped with a wear package consisting of: (2) – Wing shrouds on side walls
      – Heel shrouds at bottom edges
      Shovel attachment with unique TriPower kinematics ensuring the following main features: (1) – Horizontal automatic constant-angle bucket guidance
      – Vertical automatic constant-angle bucket guidance
      – Automatic roll-back limiter to prevent material spillage
      – Kinematic assistance to hydraulic forces
      – Constant boom momentum throughout the entire lift arc
      – Crowd force assistance
      Shovel attachment with unique TriPower kinematics ensuring the following main features: (2) – Horizontal Automatic constant-angle bucket guidance
      – Vertical Automatic constant-angle bucket guidance
      Shovel attachment with unique TriPower kinematics ensuring the following main features: (3) – Constant boom momentum throughout the entire lift arc
      – Crowd force assistance
      Type (1) Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
      Type (2) Welding procedures allow for internal counter-welding (double prep weld) wherever possible
      Type (3) Booms and sticks are stress-relieved after welding
      Type (4) Catwalks with rails at booms
      Type (5) Inspection holes in booms (FS and BH) and stick (FS)
      Type (6) Guards for shovel cylinders (FS)
      Type (7) Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
      Type (8) Special wear packages for highly abrasive materials on request
    • Automatic Lubrication System
      Capacity - Grease Container 1000 l
      Type (1) Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times
      Type (2) Connected to the main lubrication system are:
      – raceways of the swing roller bearing
      – two greasing pinions for the internal gearing of the swing ring
      – pivot points of attachment, bucket and cylinders
      – bottom rollers of undercarriage
      Type (3) System failures displayed by Board Control System
      Type (4) Grease filters (200 μm) between service station and container as well as directly behind grease pump
      Type (5) Connected to main lube system are:
      – raceways of swing roller bearing
      – 2 greasing pinions for the internal gearing of swing ring
    • Undercarriage
      Bottom Rollers - Each Side 7
      Components (1) Cast double-grouser combined pad links with bushings connected by hardened full floating pins
      Components (2) All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
      Components (3) Bottom rollers are connected to the automatic lubrication system
      Components (4) Fully hydraulic, self-adjusting track tensioning system with piston accumulator
      Components (5) Automatic hydraulic retarder valve to prevent over-speed on downhill travel
      Components (6) Acoustic travel alarm
      Gradeability - Travel Drives - Maximum 47 %
      Maximum Tractive Force 2942 kN
      Parking Brakes Wet multiple-disc brake, spring applied/hydraulically released
      Support Rollers - Each Side 2 plus a skid plate in between
      Track Pads - Each Side 42
      Travel Drives - Each Side 1 planetary transmission with 2 two-stage axial piston motors
      Travel Speed - 1st Stage - Maximum 1.1 km/h
      Travel Speed - 2nd Stage - Maximum 1.6 km/h
      Travel Speed - Two Stages - 1st Stage - Maximum 1.4 km/h
      Travel Speed - Two Stages - 2nd Stage - Maximum 2 km/h
    • Operating Specifications
      Bucket Payload 61 t
      Bucket Payload - Backhoe 61 t
      Bucket Payload - Face Shovel 61 t
      Operating Weight - Backhoe 548 t
      Operating Weight - Face Shovel 549 t
      Operating Weight - Front Shovel 590 t

    Product Downloads

    6060 AC/6060 AC FS Product Brochure

    6060/6060 FS Medium Product Brochure

Similar Products

Hydraulic Mining Shovels

6030/6030 FS

Hydraulic Mining Shovels

6040/6040 FS

Hydraulic Mining Shovels

6050/6050 FS

...

Mantrac Kenya Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

Newsletter

Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.