Motor Graders

140 GC

Overview

The new Cat® 140 GC motor grader combines performance with cost efficient owning and operating. Servicing the machine is easy with grouped filter locations. Comfort options, including a heating/cooling system or air suspension seat, keep you productive throughout the day.

Request a Quote
    • Service Refill Capacities
      Circle Drive with Slip Clutch 7 l
      Circle Drive without Slip Clutch 1.5 l
      Cooling System 15.1 gal (US)
      Engine Crankcase 19 l
      Fuel Tank 295 l
      Hydraulic System 55 l
      Transmission 18 l
    • Blade Range
      Blade Tip Range Backward 5
      Blade Tip Range Forward 40
      Circle Center Shift Left 752 mm
      Circle Center Shift Right 728 mm
      Maximum Depth of Cut 735 mm
      Maximum Lift Above Ground 480 mm
      Maximum Shoulder Reach Left 1764 mm
      Maximum Shoulder Reach Right 1928 mm
      Moldboard Side Shift Left 663 mm
      Moldboard Side Shift Right 512 mm
    • Machine Weight
      Note *Typically equipped with push block and ripper.
      Weight* 16620 kg
    • Blade Range
      Blade Tip Range Backward 5
      Blade Tip Range Forward 40
      Circle Center Shift Left 752 mm
      Circle Center Shift Right 728 mm
      Maximum Depth of Cut 735 mm
      Maximum Lift Above Ground 480 mm
      Maximum Shoulder Reach Left 1764 mm
      Maximum Shoulder Reach Right 1928 mm
      Moldboard Side Shift Left 663 mm
      Moldboard Side Shift Right 512 mm
    • Machine Weight
      Note *Typically equipped with push block and ripper.
      Weight* 16620 kg
    • Air Conditioning System
      Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
    • Engine
      Bore 105 mm
      Derating Altitude 4500 m
      Displacement 7.01 l
      Emissions U.S. EPA Tier 3/EU Stage IIIA
      Engine Model Cat 7.1
      Engine RPM 2,200
      Maximum Torque - ISO 9249 889 N·m
      Net Power Range (Tier 3) 131 kW
      Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
      Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
      Note (3) Power as declared per ISO 14396
      Note (4) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
      Number of Cylinders 6
      Standard Capability 43 °C
      Stroke 135 mm
      Torque Rise - ISO 9294 40%
    • Dimensions
      Length of Machine* 10322 mm
      Maximum Height 3777 mm
      Note *Typically equipped with push block and ripper.
      Width 2428 mm
    • Moldboard
      Arc Radius 413 mm
      Blade Height 509 mm
      Blade Width 3.7 m
      Cutting Edge Width 152 mm
      End Bit 152 mm
      Throat Clearance 112 mm
    • Moldboard
      Arc Radius 413 mm
      Blade Height 509 mm
      Blade Width 3.7 m
      Cutting Edge Width 152 mm
      End Bit 152 mm
      Throat Clearance 112 mm
    • Service Refill Capacities
      Circle Drive with Slip Clutch 7 l
      Circle Drive without Slip Clutch 1.5 l
      Cooling System 15.1 gal (US)
      Engine Crankcase 19 l
      Fuel Tank 295 l
      Hydraulic System 55 l
      Transmission 18 l
    • Dimensions
      Length of Machine* 10322 mm
      Maximum Height 3777 mm
      Note *Typically equipped with push block and ripper.
      Width 2428 mm
    • Engine
      Bore 105 mm
      Derating Altitude 4500 m
      Displacement 7.01 l
      Emissions U.S. EPA Tier 3/EU Stage IIIA
      Engine Model Cat 7.1
      Engine RPM 2,200
      Maximum Torque - ISO 9249 889 N·m
      Net Power Range (Tier 3) 131 kW
      Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
      Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
      Note (3) Power as declared per ISO 14396
      Note (4) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
      Number of Cylinders 6
      Standard Capability 43 °C
      Stroke 135 mm
      Torque Rise - ISO 9294 40%
    • Air Conditioning System
      Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

    Product Downloads

    140 GC Product Brochure

    140 GC Key Features

    140 GC Technical Specifications

    140 GC Key Features

    140 GC Technical Specifications

    140 GC Product Brochure

Similar Products

Motor Graders

140K

Motor Graders

14M3

Motor Graders

160K

...

Iratrac Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

Newsletter

Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.