Electric Rope Shovels

7295

Overview

7295 Electric Rope Shovel

Request a Quote
    • Weights
      Ballast - Furnished By Customer 159665 kg
      Note (1) These weights will vary slightly depending upon dipper and optional equipment selection.
      Note (2) All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
      Working Weight - With Dipper and Standard Links 793259 kg
    • Lube System
      Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
      Components (2) External fast fill from lower level.
      Type Automatic, single-line system for open gear lubricant and grease.
    • Electrical
      Drive IGBT Acutrol drive system.
      Note Other voltages available to suit customer requirements.
      Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V
      Power Requirements - 60 Hz 4,160V, 7,200V
      Power Requirements - Average Power Demand 538-753 kW (721-1,010 hp)
      Power Requirements - Peak power 2152 kW
      Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V
    • Front End
      Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
      Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
      Note High impact ropes available as an option
      Standard Rope Data - Boom Suspension - Diameter 70 mm
      Standard Rope Data - Boom Suspension - No. 4
      Standard Rope Data - Crowd - Diameter 57 cm
      Standard Rope Data - Crowd - No. 1
      Standard Rope Data - Dipper Trip - Diameter 16 mm
      Standard Rope Data - Dipper Trip - No. 1
      Standard Rope Data - Hoist - Diameter 60 mm
      Standard Rope Data - Hoist - No. 2
      Standard Rope Data - Retract - Diameter 57 mm
      Standard Rope Data - Retract - No. 1
    • Dimensions
      Dipper Capacity 19.1-38.2 m3 (25-50 yd3)
      Dipper Payload 45 t
      Note Dependent on application and material density.
    • Main Structures
      Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard 8.6 cm
      Ground Bearing Pressure Ground bearing pressure is dependent upon many factors.
      Ground Bearing Pressure - 182.9 cm (72 in) Treads 269 cm
      Ground Bearing Pressure - Total Effective Bearing Area 29.3 m²
      Hoist A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.
      Planetary Propel Dual-motor independent drive.
      Swing Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
      Upper Works Overall Width - Including Standard Walkways 12.6 cm
    • Optimal Working Ranges*
      Cutting Height - Maximum 13.7 m
      Cutting Radius - Maximum 20.6 m
      Dumping Height - With Clearance to Open Dipper Door 8.4 m
      Note (1) Optimal working ranges based on loading a Cat® 785D truck.
      Note (2) *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
      Radius of Level Floor 14.9 m
      Revolving Frame Tail Swing Radius 7.8 m

    Product Downloads

    7295 Product Brochure

Similar Products

Electric Rope Shovels

7495 HF with Rope Crowd

Electric Rope Shovels

7495 with Rope Crowd

Electric Rope Shovels

7495 HD

...

Iratrac Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

Newsletter

Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.