Underground - Hard Rock

R1700

Overview

Our goal for the redesign of the R1700 was simple; add value, power and performance with safety at its core. With each cycle, the R1700 hauls 20 percent more payload, it loads, climbs, hauls and dumps quicker. It features three engine emission options that can be tailored to your mine’s ventilation requirements. The R1700 is a powerful new tool for mining.

Request a Quote
    • Turning Dimensions
      Articulation Angle 44°
      Axle Oscillation
      Inner Clearance Radius 3139 mm
      Outside Clearance Radius 6857 mm
    • Tires
      Tire Size 26.5R25
    • Bucket Capacities
      Bolt Together Bucket 6.8 m³
      Dump Bucket - 1 - Standard Bucket 5.7 m³
      Dump Bucket - 2 6.1 m³
      Dump Bucket - 3 6.6 m³
      Dump Bucket - 4 7.5 m³
      Dump Bucket - 5 8 m³
      Ejector Bucket 5.8 m³
      Light Material Bucket 8.6 m³
    • Engine
      Engine Model Cat® C13
      Gross Power - EU Stage V Engine - ISO 14396 257 kW
      Gross Power - ISO 14396 269 kW
      Gross Power - Tier 3/Stage IIIA Equivalent Engine - ISO 14396 269 kW
      Gross Power - VR Engine - ISO 14396 269 kW
      Note (1) Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard.
      Note (2) Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard.
      Note (3) All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F).
      Note (4) No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines.
      Note (5) Optional Ventilation Reduction package available.
      Note (6) Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
      Note (7) Optional engine meeting the Tier 4 Final and Stage V emission standards is also available.
      Rated Power: Gross Power - Stage V Engine - ISO 14396 257 kW
      Rated Power: Gross Power - Tier 3/Stage IIIA Equivalent Engine - ISO 14396 269 kW
      Rated Power: Gross Power - VR Engine - ISO 14396 269 kW
    • Weights
      Empty 43177 kg
      Empty - Front Axle 17399 kg
      Empty - Rear Axle 25778 kg
      Loaded 58177 kg
      Loaded - Front Axle 41464 kg
      Loaded - Rear Axle 16713 kg
    • Operating Specifications
      Breakout Force - Lift and Tilt 24190 kg
      Bucket Capacities 5.7-8.6 m³ (7.5-11.2 yd³)
      Gross Machine Mass - Loaded 62739 kg
      Nominal Payload Capacity 15000 kg
      Rated Payload 15000 kg
      Static Tipping Load - Full Turn - Lift Arms Horizontal 31586 kg
      Static Tipping Load - Straight Ahead - Lift Arms Horizontal 37747 kg
    • Transmission
      Forward - 1 4.9 km/h
      Forward - 2 9.2 km/h
      Forward - 3 16.4 km/h
      Forward - 4 28.8 km/h
      Reverse - 1 5.9 km/h
      Reverse - 2 10.5 km/h
      Reverse - 3 18.7 km/h
      Reverse - 4 32.5 km/h
    • Service Refill Capacities
      Cooling System 75 l
      Engine Crankcase 37 l
      Hydraulic Tank 135 l
    • Hydraulic Cycle Times
      Dump 3.3 s
      Lower, Empty, Float Down 2.9 s
      Raise 6.8 s
      Total Cycle Time 13.2 s
    • Service Capacities - Not Refill
      DEF Tank 27 l
      Front Differential and Final Drive 148 l
      Fuel System 486 l
      Rear Differential and Final Drive 141 l
      Transmission 54 l

    Product Downloads

    R1700 Product Brochure

Similar Products

Underground - Hard Rock

R1600H

Underground - Hard Rock

R1700G

Underground - Hard Rock

R2900G

...

Mantrac Ghana Service Facilities

Get a Quote

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

Newsletter

Subscribe to our Newsletter and be the first to hear about new machines, equipment, projects and special offers.