19266 WhatsApp Messenger WeChat Contact us

Three axle articulated trucks

Cat 730

Stock on demand

Price on request

Engine Model

Cat® C13

Rated Payload

28 t

Heaped (SAE 2:1)

17.5 m³

Request Quote Compare Models

Jump to section:

Benefits Specifications Gallery Alternatives Services Contact

US
Metric

Feature and benefits

The Cat® 730 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, stability-assist machine rollover warning system, and a fuel saving ECO mode.

Every Tier 2/Stage II equivalent Cat engine is equipped with a combination of proven electronic, fuel, air and aftertreatment comp…

Every Tier 2/Stage II equivalent Cat engine is equipped with a combination of proven electronic, fuel, air and aftertreatment components.
Proven electronic, fuel, air and aftertreament components for peak performance and longevity.
Emissions control and improved fuel economy.
Advanced MEUI-C injector platforms deliver increased injection pressures and more precise fuel rates. These durable injectors enhance responsiveness while controlling soot.
Innovative air management optimizes airflow, power, efficiency and reliability.

Learn More

The Cat CX31 six-speed forward, single-speed reverse transmission features Advanced Productivity Electronic Control Strategy (APEC…

The Cat CX31 six-speed forward, single-speed reverse transmission features Advanced Productivity Electronic Control Strategy (APECS) and Electronic Clutch Pressure Control (ECPC) which deliver smooth gear changes with improved acceleration and higher productivity.
Speed hold/limiting function allows the machine speed to be limited in 1 km/h or 1 mph steps to conform to site speed restrictions.
Gearshifts have been significantly improved to maintain direct drive lock-up, and eliminate dropping into converter drive. Reducing the use of torque converter drive helps maintain ground speed and gradeability.
Variable shift points used based on the operating conditions, which also aid in maintaining ground speed during gear changes on grades.
Critical gearshifts maintain direct drive lock-up, and eliminate dropping into converter drive. This maintains ground speed during shifts on grades.
The transmission automatically modifies shift points to best suit operating conditions and performance.
Retarding levels are automatically reduced on lesser grades in lower gears.
Large capacity torque converter, configured for off-highway applications, allows the higher engine power to be transmitted more efficiently to the lower power train.
The engine compression brake improves retarding response and increases retarding power.

Learn More

Advanced automatic traction control (AATC) is a proactive application of the inter- and cross-axle differential locks is ‘on-the-g…

Advanced automatic traction control (AATC) is a proactive application of the inter- and cross-axle differential locks is ‘on-the-go’ and fully automatic. The operator does not have to think about when and where to engage either diff lock. Sensors monitor the machine and wheel speeds, enabling instant response in high rolling resistance conditions. Operation is seamless and smooth, eliminating wheel slip for maximum traction and therefore productivity.
AATC reduces tire and driveline abuse, eliminating lost machine efficiencies caused by improper manual operation of the differential clutches and reducing the cost of premature tire replacement.
Automatic retarder control (ARC) makes use of the retarder easier for the operator to use. As with AATC, a number of machine operating aspects are monitored. If required, the engine compression brake is engaged automatically to control machine speed when descending a grade. The system can help towards eliminating engine overspeed, improving safe machine operation and reducing cycle times, yet still having the flexibility of manual control if needed.
With the assisted dumping system, tipping of the dump body can be done automatically with the new Assisted Hoisting Control. Flick the new body raise/lower switch and the machine will apply the service brakes, switch the transmission to neutral and raise the body at the required engine rpm. Lowering the dump body is done the same way, flick the switch and the machine will lower the body and place it in float. Two flicks, one up, one down.
Hill Assist reduces potential ‘roll-back’ on grades. If an operator stops the machine on a grade, when taking his foot off the service brake pedal, the machine will automatically hold the service brakes to prevent machine rolling backwards.
Waiting brake applies the service brakes when neutral gear is selected, allowing quick and easy control of the machine at the load or dump area.

Learn More

The new cab is designed to make all aspects of machine operation as simple as possible for every operator. The controls and gauges…

The new cab is designed to make all aspects of machine operation as simple as possible for every operator. The controls and gauges are easy to read and straightforward to use, allowing the operator to focus on safe machine operation while maintaining productivity.
Unique to Cat articulated trucks, the combined hoist/transmission lever provides easy, intuitive control of gears and hoist functions. The new assisted hoist system gives improved control to the operator, allowing for faster cycle times and less control movements.
Offering both automatic and manual options, the system gives operators flexibility to choose their preferred method of control. When using the automatic system to tip a load, the machine neutralizes the transmission, applies the service brakes and hoists the body to maximum angle at the required engine rpm. When lowering the body this feature prevents a hard stop onto the frame, eliminating shock loads and potential damage. Automatic use can reduce operator interactions by up to 50 percent, compared to the previous model, depending on the site tipping procedure.
Also incorporated into the lever are waiting brake, transmission hold, machine speed limiter and parking brake selection. This gives operating a more automotive feel. No separate switch is now needed; you just push the lever into park.
The newly styled and updated dash puts all controls within easy reach of the operator. It features LED illuminated rocker switches for easy use in all operating conditions. The fit and finish delivers an automotive feel with the industrial strength you would expect from Caterpillar.
The updated touchscreen dash mounted display allows the operator to monitor and adjust various levels of machine performance and conditions, as well as machine warning categories. These include configuration settings, operator and machine totals, service information, various machine status parameters, machine payload information (when fitted), stability assist, and the video feed from the rearview camera.
Make and receive hands free calls via the optional Bluetooth equipped stereo with clearer quality due to the quieter cab and upgraded speakers.

Learn More

The large open cab offers a comfortable working space for both the operator and an additional person (e.g. training purposes). The…

The large open cab offers a comfortable working space for both the operator and an additional person (e.g. training purposes). The second seat is fully padded with a backrest and a wide, retractable seat belt for a secure and comfortable ride. Positioned adjacent to the operator, the seat gives the trainer a clear view of the instrument panel, controls and the road ahead.
A new large side storage box is heated or cooled by the HVAC system depending on operator preference. Twin cup holders and multiple storage spaces have also been introduced to help give operators an uncluttered workspace.
The new air suspension seat gives an increased range of adjustments over previous offerings including fore/aft isolation, which dramatically reduces horizontal vibrations and jolts. This provides a greater number of operators with the ability to tailor their seating position for a more comfortable working day.
The improved automatic climate control system gives you the option to maintain the temperature desired by the operator. A reduction to in-cab noise 72 dB (–4 dB from previous model) contributes to a more comfortable working environment for the operator, all day, every day.

Learn More

All three axles have oscillating A-frames with lateral tie rods, controlling sideways movement of the axle and providing stability…

All three axles have oscillating A-frames with lateral tie rods, controlling sideways movement of the axle and providing stability. In conjunction with suspension system, it allows the operator to travel at speed over rough terrain and softens impact loads on structures and components.
The front suspension has large bore, low-pressure cylinders are purpose designed for off-road applications and offer a soft, smooth ride for the operator. The front suspension oscillates ±6° to assist in providing a smooth ride. Suspension mounting points are integrated into the axle housing, increasing reliability.
The rear suspension is comprised of a walking beam and Caterpillar designed long life rear suspension mounts; the rear suspension system provides a reliable and stable ride for excellent travel over rough terrain and aids load retention.
Introduced for the first time on this model, the oil-immersed wet brake system is a multi-disc, multi-plate design. Enclosing the brakes prevents the ingress of contaminants. This protects the system, extends life, and reduces replacement costs while improving machine uptime.

Learn More

The front frame design features a large box section and wide, stiff frame beams to handle torque loads. The divergent frame design…

The front frame design features a large box section and wide, stiff frame beams to handle torque loads. The divergent frame design decreases stress in the hitch area and optimizes suspension geometry. The frame design makes maximum use of robotic welding for increased durability.
The rear frame twin-box construction minimizes stress concentrations and provides low weight with long service life.
The three-point oscillating axle front suspension provides excellent ride quality. It also protects the truck from adverse road conditions by absorbing shock loads that would reach the frame.
The articulating hitch provides the truck with steering articulation, and the oscillation helps provide all-wheel ground contact in rough terrain.
All machines have a large target area dump body design to provide consistently high load carrying capacity. The diverging flow design gives clean material discharge, which maximizes production and avoids the waste of carry-back.
The output transfer gear (OTG) distributes drive to the tractor and trailer and includes a wet clutch differential lock for optimum traction in poor underfoot conditions.
Dual-circuit, all wheel braking system. The full power hydraulic system actuates enclosed, oil immersed, multi-disc, multi-plate brakes with independent front and rear circuits and accumulators.

Learn More

Cat Product Link wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performin…

Cat Product Link wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performing. The system tracks location, hours, fuel usage, productivity, idle time, and diagnostic codes through the online VisionLink user interface so you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower costs.
Cat Production Measurement brings payload weighing to the cab to help optimize job site efficiency and productivity. Operators can view real-time load weights on the integrated display and know precisely when target is achieved, while cab-mounted external payload lights on all four corners signal the loader operator when to stop, reducing the risk of machine overloading. Operators can track daily productivity from the cab, with quick access to truck payload weights, loads and cycle counts, and daily totals; or remotely via LINK technologies.
Cat Detect with Stability Assist warns the operator if machine is approaching a pre-set angle during operation; when driving and tipping. If using the assisted hoist, the machine will stop hoisting the body and give an audible and visual warning. The system monitors angles of tractor, trailer and grade independently. This increases operator awareness of machine stability during operation. All tractor and/or trailer rollover events are logged and reported via VisionLink.

Learn More

Expand to See More

Technical specification

US
Metric

Engine

Specification	Value
Engine Model	Cat® C13
Bore	130 mm
Stroke	157 mm
Displacement	12.5 l
Peak Engine Torque Speed	1.200 r/min
No Engine De-rating Below	3.810 m
Peak Engine Torque Gross (SAE J1995)	2.141 N·m
Peak Engine Torque Net (SAE J1349)	2.120 N·m
Net Power - ISO 14396	276 kW
Gross Power - SAE J1995	280 kW
Net Power - SAE J1349	274 kW
Note (1)	The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
Note (2)	The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Emissions	The 730 meets either Tier 2/Stage II or Tier 3/Stage IIIA equivalent emission standards.
Note (3)	Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
Engine Model - Either U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage IIIA equivalent	Cat C13

Weights

Specification Value

Rated Payload 28 t
Body Capacities

Specification Value

Heaped (SAE 2:1) 17.5 m³

Struck 13.3 m³

Tailgate Heaped SAE 2:1 18.8 m³

Tailgate Struck 13.9 m³
Transmission

Specification Value

Forward - 1 8 km/h

Forward - 2 15 km/h

Forward - 3 22 km/h

Forward - 4 34 km/h

Forward - 5 47 km/h

Forward - 6 55 km/h

Reverse - 1 9 km/h

Sound Levels

Specification	Value
Interior Cab	72 dB(A)
Note (1)	The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Note (2)	Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Specification	Value
Rear Axle - Rated Load	12.360 kg
Rear Axle - Empty	4.420 kg
Total - Rated Load	28.000 kg
Rear Axle - Loaded	16.780 kg
Center Axle - Loaded	17.000 kg
Total - Loaded	51.500 kg
Center Axle - Rated Load	12.360 kg
Front Axle - Loaded	17.720 kg
Front Axle - Empty	14.400 kg
Total - Empty	23.500 kg
Center Axle - Empty	4.640 kg
Front Axle - Rated Load	3.280 kg

Service Refill Capacities

Specification Value

Fuel Tank 412 l

Cooling System 83 l

Hydraulic System 110 l

Engine Crankcase 38 l

Transmission 47 l

Final Drives/Differential 125 l

Output Transfer Gear Box 24 l
Body Hoist

Specification Value

Raise Time 12 s

Lower Time 8 s
Steering

Specification Value

Lock to Lock 4.75 seconds @ 60 rpm
Standards

Specification Value

Brakes ISO 3450 – 2011

Cab - FOPS ISO 3449 Level II – 2005

Cab - ROPS ISO 3471 – 2008

Steering ISO 5010 – 2007
Body Plate

Specification Value

Type High strength Brinell HB450 wear resistant steel

Turning Circle

Specification	Value
Turning Dimensions - Clearance Radius	8.075 mm
Turning Dimensions - Inside Radius	3.879 mm
Turning Dimensions - SAE Turning Radius	7.470 mm
Turning Dimensions - Steer Angle - Left/Right	45°
Turning Dimensions - Aisle Width	5.332 mm
Note	Dimensions are for machines equipped with 23.5R25 tires.

Body Plate Thickness

Specification Value

Side Plates 11 mm

Base Plate 13 mm

Front Plate 7 mm

Optimal Loader/Truck Pass Matching

Specification	Value
Wheel Loaders: 972M/972M XE - Passes	3–4
Note	An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
Wheel Loaders: 966M/966M XE - Passes	4
Wheel Loader: 962M - Passes	4–5
Hydraulic Excavators: 349F/349F XE - Passes	4–5
Hydraulic Excavators: 336F/336F XE - Passes	5–6
Wheel Loader: 950M - Passes	5

Note

Standard and optional equipment may vary. Consult your Cat dealer for details.

Operator environment

Heater and defroster with four-speed fan
Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt
Combined gear selection and hoist control lever
Mirrors: extensive arrangement for improved visibility
Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook
Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp
Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Machine Security System (MSS)
– Secondary steering energy source engaged
– Hour meter
– Retarder active
Windshield wiper and washer, two speed, intermittent (front)
Tilt and telescopic steering wheel
Touchscreen display incorporating the rearview camera video feed
Secondary steering – electro hydraulic
Sun visor
Windows opening both sides, tinted
Retractable belt: Operator seat and second seat
Adjustable air vents
Windshield wiper and washer, two speed (rear)
Air conditioning with R134A refrigerant
Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Cat technologies

Cat Detect with Stability Assist
Product Link

Electrical and lighting

Batteries (two) maintenance free
Horn
Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light
– Two stop/tail lights
– Front and rear direction indicators
Electrical system: 24-volt, 10A 24- to 12-volt converter
Remote starting receptacle (cables not included)
Main disconnect switch

Power train

Cat C13 engine
Three axle, six-wheel drive
Retarder: engine compression brake
Differentials: standard with automatic clutched inter- and cross-axle differential locks
Auto shift six-speed forward and one reverse transmission
Dual circuit oil immersed, enclosed brakes – all wheels

Safety

Reverse alarm
Rearview camera
ROPS/FOPS cab

Guards

Radiator
Crankcase
Rear window
Axle
Front dump body spill guard, integral part of fabricated body

Other standard equipment

Mud flaps: wheel arch and body mounted with transportation tiebacks
Tires, six 23.5R25, radial
Vandalism protection: lockable caps
S·O·S sampling valves
Sound suppression (only standard in Europe)

Note

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional equipment

Fuel additive – anti-waxing
Bluetooth radio stereo system
Wheel chocks
Tires, six 750/65R25, radial
Fast fuel fill
Exhaust heated body
Scissor tailgate
Flashing LED beacon
Roof mounted High Intensity Discharge (HID) work lights
Product Link Elite: PLE631 (satellite), PLE641 (cellular). Product Link is optional.
Cat Production Measurement payload monitoring system
Bare chassis (no body) long wheel base
Infrared glass – high ambient cab
Heated rearview motorized mirrors
Ether start
Bare chassis (no body) standard wheel base
Auto lube installation for automatic greasing of bearings
Four-point seat belt
Body liners
Engine block heater
Cold weather start attachment
Window blinds
Cold weather coolant –51° C (–60° F)
Heated/cooled seat
Sound suppression (only standard in Europe)
Machine Security System (MSS)

Download technical specifications

Learn more information about the Cat 730 Articulated Truck.

Download (2.22 MB, PDF)

Media gallery

Filter by category:
All
Photos
360 View

Frequently compared machines

Service Solutions

From pre-purchase consults to end-of-lifecycle benefits, Mantrac informs, advises and partners with you.

Get in touch with
our sales team

Speak with the Sales Team to learn the latest prices and information on products that can deliver value and help transform your business.

Enquire now

Speak with our local experts

Find the perfect machine or equipment solution by contacting one of our local specialists. They are on standby, ready to help you solve your operational challenges.

Mantrac Kampala

Kampala, Uganda

Hotline: 256312330600

Connect on WhatsApp

Send an email

Specification	Value
Forward - 1	8 km/h
Forward - 2	15 km/h
Forward - 3	22 km/h
Forward - 4	34 km/h
Forward - 5	47 km/h
Forward - 6	55 km/h
Reverse - 1	9 km/h

Specification	Value
Fuel Tank	412 l
Cooling System	83 l
Hydraulic System	110 l
Engine Crankcase	38 l
Transmission	47 l
Final Drives/Differential	125 l
Output Transfer Gear Box	24 l

Specification	Value
Raise Time	12 s
Lower Time	8 s

Specification	Value
Lock to Lock	4.75 seconds @ 60 rpm

Three axle articulated trucks

Cat 730

Feature and benefits

Technical specification

Engine

Weights

Body Capacities

Transmission

Sound Levels

Operating Weights

Service Refill Capacities

Body Hoist

Steering

Standards

Body Plate

Turning Circle

Body Plate Thickness

Optimal Loader/Truck Pass Matching

Note

Operator environment

Cat technologies

Electrical and lighting

Power train

Safety

Guards

Other standard equipment

Note

Optional equipment

Download technical specifications

Media gallery

Frequently compared machines

Service Solutions

Warranty & Guarantee

Technology

Financing

Get in touch with our sales team

Speak with our local experts

Get in touch with
our sales team