Fill out our form with your model of interest and we'll send you a downloadable brochure or technical specifications document.
The PL61 is part of a full line of purpose-built Cat pipelayers designed for performance, safety and serviceability. Easy transport width, combined with the experienced support of the Cat dealer network, means this key pipe line equipment is available when and where you need it.
18 ton (40,000 lb.) lift capacity with side boom. Easy transport width at…
Hystat transmission, faster steering response for superior maneuverability on the pipeline. Choice of narrow or wide tracks…
Worldwide Cat dealer network understands pipeline job site needs for outstanding support, even in remote areas. Purpose-buil…
Rear vision camera, with dedicated display, adds to visibility for greater safety. Load Monitor Indicator (LMI) delivered wi…
Specification | Value |
Engine Model | Cat C4.4 |
Flywheel Power | 97 kW |
Net Power - 2,200 rpm - ISO 9249 | 97 kW |
Net Power - 2,200 rpm - ISO 9249 (DIN) | 132 HP |
Cat C4.4 Emissions | U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final |
Cat C7.1 Emissions | China Nonroad Stage III, equivalent to Tier 3/Stage IIIA |
Fuel Tank | 260 l |
DEF Tank(1) | 19 l |
Note (1) | All nonroad Tier 4 Final, Stage IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
Note (2) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
Note (3) | (1) Machines equipped with Tier 4 Final/Stage IV emissions reduction technology. |
Specification | Value |
Lift Capacity | 18.144 kg |
Specification | Value |
Cab, 560 mm (22 in) Shoes(1) | 18.090 kg |
Cab, 560 mm (22 in) Shoes | 18.170 kg |
Cab, 760 mm (30 in) Shoes(1) | 18.560 kg |
Cab, 760 mm (30 in) Shoes | 18.640 kg |
Note | (1) Machines equipped with Tier 4 Final/Stage IV emissions reduction technology. |
Specification | Value |
Cab, 560 mm (22 in) Shoes(1) | 17.040 kg |
Cab, 560 mm (22 in) Shoes | 17.110 kg |
Cab, 760 mm (30 in) Shoes(1) | 17.510 kg |
Cab, 760 mm (30 in) Shoes | 17.590 kg |
Note | (1) Machines equipped with Tier 4 Final/Stage IV emissions reduction technology. |
Specification | Value |
Track Gauge | 2.000 mm |
Track on Ground | 2.645 mm |
Ground Contact Area - LGP | 4.46 m² |
Ground Contact Area - Narrow | 3.29 m² |
Ground Pressure(1) - LGP | 40.8 kPa |
Ground Pressure(1) - Narrow | 53.9 kPa |
Ground Pressure - LGP | 40.9 kPa |
Ground Pressure - Narrow | 54 kPa |
Number of Shoes/Rollers - Each Side | 40/8 |
Track Shoe Width - Narrow/LGP | 560/760 mm (22/30 in) |
Note | (1) Machines equipped with Tier 4 Final/Stage IV emissions reduction technology. |
Specification | Value |
Width - Tractor - With 760 mm [30 in] Shoes | 2.760 mm |
Width - Tractor - With 560 mm [22 in] Shoes | 2.560 mm |
Width - Counterweight Extended | 4.750 mm |
Width - Tractor - Counterweight Retracted | 3.240 mm |
Width - Tractor - Counterweight/Boom Removed | 3.190 mm |
Track Gauge | 2.000 mm |
Operating Length | 3.850 mm |
Length - Track on Ground | 2.645 mm |
Machine Height - Tip of Winch | 2.570 mm |
Height of Machine from Tip of Grouser to Top of Stack(1) | 2.850 mm |
Height - Top of ROPS: Canopy/Cab | 2.985 mm |
Boom Height (at SAE 1.22 m [4 ft] overhang) | 6.220 mm |
Specification | Value |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg of refrigerant which has a CO2 equivalent of 1.859 metric tons. |
Learn more information about the Cat PL61 Pipelayer.
Download (2.22 MB, PDF)From pre-purchase consults to end-of-lifecycle benefits, Mantrac informs, advises and partners with you.
Speak with the Sales Team to learn the latest prices and information on products that can deliver value and help transform your business.
Find the perfect machine or equipment solution by contacting one of our local specialists. They are on standby, ready to help you solve your operational challenges.
Mantrac Tanzania Ltd.
Plot no 4A
Nyerere Road
P.O. Box 9262
Dar es Salaam
Ask an Expert Today!